Search results

  1. I

    Whats the highest speed you have ever gone in the MKIII?(nws)

  2. I

    Strange bearing/wheel problem

    The lugnuts/wheel hold the rotor in place Try some "Brake Quiet" sprayed on the backs of the pads and see if the noise stops. New wheelbearings come prepacked with grease so there's no reason for the shop to have changed it.
  3. I

    Max hp ?

    BHP? (Crank HP) Most people here speak RWHP and is way different to at the crank. When mine is running I'm around the 550rwhp mark daily. Tune is King get it even a little wrong and you have seconds before damage.
  4. I

    Whats the highest speed you have ever gone in the MKIII?(nws)

    "swallow" ? :evil2:
  5. I

    What is the worst mistake you have ever done to your supra?

    a) buying it b) opening the hood it was all downhill from there...... Dats: Here's a tip that might help you and others when chasing threads. Grab a bolt you know fits the hole and lay the Tap into the threads they should match and fit against each other with no gaps other than the...
  6. I

    hard top vs. targa top

    Lance: Compare the Sills and A Pillars between a Targa and a HT..... (Have seen both as cuts here and the Targas have lots of extra internal reinforcement) So if there's no difference in weight I want to know what Toyota left out of a Targa to keep it the same ;)
  7. I

    Add an extra qt?

    If I do a full change and flush the Cooler circuit it's 12 qts and I use Synthetic so quite a few $$$ ;)
  8. I

    Overkill brakes?

    The idea with multi piston callipers is to get even pressure across the entire pad face, this is a great idea as long as the rest of the system is designed to match ie: Master size and pedal leverage as well as front/rear balance. It's NOT a case of more = better and brakes are one area that...
  9. I

    cigar box project?

    Put Cigars outside the box ;)
  10. I

    GENESTARWINDGSW !!!! clean your PM box

    He's having an enforced break and won't be back for another 3 days.
  11. I

    Overkill brakes?

    Yeah cos more pistons are better........ :nono:
  12. I

    anyone have problems pulling their motor

    7 hours from start to motor on stand and workshop cleaned up and tools put away.
  13. I

    BHG pitting in block in under 20 days?

    Yes it needs to be machined
  14. I

    anyone have problems pulling their motor

    LMAO now there's an understatement ;)
  15. I

    anyone have problems pulling their motor

    After 10>15 times it gets sort of easy pulling the motor (I'm doing it this morning again....) Both my stock mount were torn 80% through and the Torque Damper was the only thing holding the motor in at 550rwhp ;)
  16. I

    anyone have problems pulling their motor

    Not all cars have it.
  17. I

    BHG pitting in block in under 20 days?

    Macro pic please?
  18. I

    strange oil pressure cranking problem

    LOL vote #1 insane ;)
  19. I

    strange oil pressure cranking problem

    Green is bad :(
  20. I

    strange oil pressure cranking problem

    Coolant right away Corrosion on bare metal starts in minutes so why give it a push start in the motor ;)
Top Bottom