Search results

  1. I

    High lift camshaft

    I don't like reduced base circle cams as you need heavy/thick lash gear to make up for it. 220 advertised or @ 50? Auto or manual?
  2. I

    How to tell the differance between the w-58 and R-154 trans

    There is also a 4.5 G series gearset.
  3. I

    Doing some more tuning..... over 900whp this time.

    Sean: Sounds great! What are the cams?
  4. I

    ? for people using the RX-7 oil cooler

    "Work hardened" not "Heat affected" ;)
  5. I

    I am sofa king bored.

    You "could" go through posts here and correct spelling mistakes ;) That should keep you occupied for say..... the next 10 years :D
  6. I

    ? for people using the RX-7 oil cooler

    runs in chucks the "Work hardened aluminium" grenade and runs out :D
  7. I

    Torque conveter installation...

    There are 3 splines you need to engage in the front of the trans. Apply some lube to the Lip seal then lift the Converter into place and while supporting it by it's nose gently rotate and push it into place. You'll "feel" the splines slip into place and it may take a few tries, when...
  8. I

    CRAZY DRIFT!!!! LOVIN IT!!!!

    Short answer is "you wouldn't" ;)
  9. I

    Embarrising: Whats your favorite Chick Flick?

    And there's another "reason" ;)
  10. I

    Just curious as to what oil pressure you guys are getting on a stock setup

    There are NO "seals" in a 7M under direct Oil Pressure...
  11. I

    THE CLASH OF THE TITANS 3000gt-supra-rx7-300zx meet

    Robert: This only needs to be posted once, let me know which one you want to keep and I'll delete the rest.
  12. I

    High lift camshaft

    You would need to measure what's in there now and then add/subtract whatever lash you desire then look at the chart I posted and order the correct bucket for each hole. Yes in a used 7m head they're a 100% drop in, in a new head they tend to be a little tight.
  13. I

    High lift camshaft

    Nope they're the shimless buckets you need to change sizes if you have to adjust lash.
  14. I

    JDM TYTE YO (No Hate Allowed) (Tonssss of pics)

    Seems like they compete to find the most ridiculous wing possible ;) Awesome cars (if you lose the joke wings)
  15. I

    How good are Eagle-Rods??

    Pimp: Yep same bolts Pauter use :)
  16. I

    How good are Eagle-Rods??

    "If" their specs are true damn good rods these days!
  17. I

    High lift camshaft

    Shimless buckets available sizes 1SZ-FE 1000cc Echo 13751-23030 5.12 13751-23040 5.14 13751-23050 5.16 13751-23060 5.18 13751-23070 5.20 13751-23080 5.22 13751-23090 5.24 13751-23100 5.26 13751-23110 5.28 13751-23120 5.30 13751-23130 5.32...
  18. I

    Anyone running 275s up front?

    245's on a Mk3 aka "Pizza Cutters" ;)
  19. I

    High lift camshaft

    Mine are hardface welded and around the 9mm lift mark on stock base circle.
  20. I

    To PPS or Not to PPS? Now, that is the question....

    Same pump different pully to overdrive it and raise pressure. The electrics are in the rack with a bypass valve to reduce assistance at speed.
Top Bottom