Search results

Nick - This car could be a daily driver, but my wife drives a WRX and I drive a 2500HD chevy 4x4. I just kinda cruise with the supra. Teamslow - R&R Engine here in town. Diesel shop. Bryan - No, never got that 12.50 all boost. I might try that again this fall when in cools off with another...

So much more to a cam than just the advertized duration. why is everyone all of a sudden only refuring to any cam by its Duration? 272 this and 272 that, it means nothing. You can have a 7.5mm lift 272 duration or a 13mm 272 duration. Duration is not the only spec on a cam guys!

Yes, stock size. It was a fresh rebuild with new wheels and shaft. Same turbo that pushed my car to a 12.61 without nitrous, and 11.95 with a 70 shot of nitrous. I am not going to rebuild it. I have a tial wasgate, a log manifold and a PT61 turbo that will go on in its place. What is even...

This is a little funny. I had just talked about how tight and reliable my new ct-26 was at 20 psi a week ago in another thread. After winning first place in the weekend bracket race at Quaker city raceway here in ohio, my turbo decided to whine about it. 2 years and almost 300 passes down the...

To all who did not go, there was plently of mk3's at the dragrace portion. Lots of magazine quality ones I might add as well. But as Lance has said, most of this magazine's pics are from the road course, and not the drags. And if I recall, the record for a non-nitrous 7m is somewhere in the...

I am still waiting to see someone post the where and when of the drag event. What is the name of the strip? Classes?, address? Hard to plan any trip with out all the info.

This is 100% correct and should end all the "stronger than stock" debate as it has nothing to do with strenght. In lay terms, a large piece of toilet paper is no stronger than a small piece, but the larger one will absorb more crap than the smaller.

Figgie- Yep, I was just going by what the spec sheet on the damper says and what I was told bt ATI when I ordered them. Was told and read that they are good for 600 and under. Maybe they should stress the under part of that statement. Always good to jaw with you, remember all our debates we used...

5000.00 on autotrader 38-4200 on e-bay 25-3000.00 on Supramania

PM me, I will not talk any business in open forum.

I don't have a pic of the paperwork or the lable but it says "600hp or less" right on the product lable and in the paper work. I would think these pullies are more than enough for most street driven 7m's

pn 918525 rated 600hp by ATI 5.5 inch Aluminum damper 3 pully

I have two of them in my hands, both rated to 600hp.

They have a newer oem size unit now rated for 600hp. I think they have a considerable safty margin on the ratings.

Powertrip in the vendor section

Hey! I usually go to dragway 42, sometimes quaker city. Norwalk is just too tough to get any track time on. I only gained about 30 hp going from 16 psi to 20. The real trick to hp from the stock ct is the condition of your motor. Mine was 100% new inside, ct was all new also. A few of you...

It is what you have to do when trying to set the stock ct 1/4 mile time record. No IAC readings, sorry. And before anyone says the ct will explode, let me say that I have nearly 200 1/4 mile passes on this new one at 20 psi and still have zero shaft play. Pays to have them fully rebuilt and...

Fresh motor, fresh ct, VPC with SAFC-2, 550's, walbro, Titan DP, Blitz NU-R, AFPR kit, 2mm hks headgasket, 3000 stall converter, built a340, 20psi MBC, 2 hrs of dyno tunning 359hp NO NITROUS..

359rwhp - stock turbo and intercooler