Search results

No smoke at all although it has been cold here lately but the smoke doesn't look or smell like anything out of the ordinary. Oil smoke is a thick white smoke right? The smoke I have seen from my exhaust ever since it got cold was very thin or light smoke that you see coming from exhausts in the...

New Monroe max lift hood struts, work beautifully but I found out today that the rear ones are starting to go out, so soon I will be replacing those. I also found out that my oil level is very very low when I checked it there was a little bit of oil on the tip of the dipstick and that confuses...

ouch what is wrong with it?

I do not miss taking my motor apart at all lol my body hated me

It is a huge difference can't even tell there is a windshield lol mine had a long crack from the passenger side to the driver side in the middle Went hunting for shop and found one that did it for $85 bucks, the place looked good so I figured they would do good work, I had to help them open the...

New windshield

lol yea I ordered a new hose this is the one right? http://www.amazon.com/gp/product/B000C2S7UG/ref=oh_details_o00_s00_i00 it looks like it I need a new clamp because the factory clamp is retarded it cuts into the hose overtime.

Yup, it is the heater hose I can tell because of where the rust is lol it is annoying that my cooling system is rusty or turns the water into a rust color but it is helpful for spotting leaks especially on the driveway you can see powdered rust if something leaks over night and the water...

If it is that small 90 degree hose I am going to murder people because that thing is a MAJOR PAIN IN THE DICK to put on. I will check it out and find the source of the leak tomorrow morning if I have time then order a silicone hose accordingly.

Found the leak it seems to be coming from the top hose that goes to the back of the motor I've had problems with that before but it was just me forgetting to tighten the clamp maybe it needs to be retightened but I rather get a silicone hose for it, do you guys know if they make one to replace...

I noticed today that my coolant light came back on I topped it off figured it was just air getting out since the level was not very low it was near the top and I poured some water into the reservoir and that stopped the light from coming on. Well yesterday it came back on and I didn't pay too...

well the reason why I want a JZ is because I would build it to where it is a new motor, more available parts, better sound, can handle more power, better gas mileage as well, and I am not trying to have a lot of down time on my MK3, so I plan on getting a JZ motor and building it to where I want...

A friend of mine may be giving me a 2jzge block for free, is it worth using that to build it to my goal of 500hp or will the block not be able to handle it?

Looks damn good, video please

I don't remember hearing the rod knock when I was on Rotella 15w-40 but I've been told that using that oil is making the pump work harder.

I'll give it a shot

Yea the reason why I don't think it's a big issue or one at all is because it only knocks for 2 seconds max during the initial start up then it's fine.

interesting, I'll just leave it as is since I am not having any problems unless that slight rod knock on cold starts is bad.

do i pour in the entire bottle or follow the directions?

so there is nothing I should be really worried about other than trying your start up method just to help?