Search results

LMAO- This is my idea of the stereotypical 'underground racing' Japanese mechanics, right down to the moptop hairdo's and combat boots! Your car is really awesome!

Make da' biatch hold'em fo ya. :naughty: Kidding.

I once pulled the motor w/ the power steering pressure hose still connected- messed it all up. As for the clutch, remove the two inspection covers, and you remove the clutch fork by pulling it straight out. Then you rotate the motor so you can get at each clutch pressure plate bolt.

That might just be the injectors..... NOT. sorry man- but that just means it's time for a turbo swap.

I have the F1 stage 3 with an aluminum flywheel, and it's slipping after~ 5,000 miles. I don't beat on the car much, and I don't think I have more than 275tq at the wheels. I actually think my front tranny seal might be leaking and contaminating the disc, but when I replace it, I'm going to make...

Hey guys- I went down to the Varsity this past Thursday(9/3) and I was the ONLY mk III that I saw. In fact, I only saw 1 or 2 Mk IV's there, and the owners weren't around their cars. It was, however, packed. Lotta s13/s14's, Suby's and Hondas, and a few vette's, mustangs, etc. the most...

So did you ever fix the #2 cylinder problem?

Thanks- Well, just got back from a 4-wheel alignment. The before-and-after spec sheet shows that camber and caster were only slightly off, but one wheel on each end of the car had a bad toe-in setting. I went conservative on camber, at only 1 degree negative on both ends, and toe-in and caster...

Well, as for the TRD sticker- that was put on the car in like 1996, so...forgive me! And someone liked the 16x8 Mille Miglia's....better? Aside from the curb rash, chipped paint and 16x8 size....ok. Anyhow, I will be getting a 4 wheel alignment today or tomorrow, and will add a touch of...

The color difference? If you're talking about the shipping error- two wheels being lighter color- No. As I said, I shipped them back and got them replaced. If you mean, how does the chromium black match up to the paint color- well, it's pretty much right on.

Hey! I finally get to add to the thread! XXR (Sportmax) 502's in chromium back. front- 18x8.5- offset 35, 235/40/18 rear- 18x9.5- offset 35, 265/35/18

Well, After rolling along(not so smoothly) for the past 12 years on the same old Mille Miglia's- stock size, mind you- I decided she deserved new wheels. So i ordered a set of XXR(Sportmax) 502's in chromium black. Problem was that when they arrived...the fronts and rears were two very...

NICE. .... ...........now lower it.

I have the probes and have never heard piston slap from them(.5mm over)

Axxis Metal master FTW. I've used two sets on my car, and never, ever had squeal. In fact, I once tried 'upragding' to Axxis Ultimate ceramic. They didn't stop or bite any better, they made more dust and squealed. I ended up putting the metallics back in.

Yup, I used long needle nose pliers. Better yet, get some needle nose vise grips, so that you can lock the clamp open.

Awesome. Just wish you'd prepped the rest of the car for paint while it was apart. PAINT IT!!!

yeah, I think I have heard of tapping stright to 7/16's.

http://www.supramania.com/forums/showthread.php?t=35682 you're welcome. : ) ps- they all require helicoil, but can be done in-car. of course, if you want to go with a 7/16 and not helicoil first, you can always give that a try, but I don't think heli-coiling is that difficult, and it's worth...