Search results

They are up high enough, and I have good quality boots on there.

Nope, it will not use a stock flange or stock check valve.

:nuts:

The filter is stainless, and almost nothing gets in but gas because of the strainer on the pump in the tank.

There are inlets on both sides, one gets a plug. I guess It could go on the other side but it seemed to fit better like that. Everything is just hand tight for the pics. I have to leave it apart until I get the rest of the project finished. I used a v8 set and modified the connectors on one end.

Not bad! I ran the same exact time and trap when I had the same exact mods.

I would think that getting "bad gas" is almost impossible these days. Their tanks are throughly inspected and tested, and changed every certain number of years. If you got a tank of bad gas that would mean they had thousands of gallons of bad gas delivered. I have changed many mk3 fuel pumps now...

I cant stand looking at it! :mad: It's right in the way when I want to work on anything related to fuel, tps, tb, etc... and the hose for it goes over the engine.

:biglaugh: :umno:

If you use a flare nut wrench on the fuel line side and put another wrench on the filter itself the bracket will not bend. You might need some long flare nut wrenches to get some extra leverage if you have weak arms :biglaugh: On the tank fuel output, the hardline nut is fixed to the pipe...

Yes, those metal stalagtite looking things are left inside from the casting. You would never know they are there unless you have removed a set of freeze plugs. LOL

Thanks! Wait till you see what I do with the isc :icon_wink

The last 1jz mk3 swap we did the gas smelled absolutely terrible and the pump was not running at all. We pulled the gas tank and the fuel had sat for so long it turned to something like varnish and got all the rubber in the tank all gooey. The return line was completely clogged. The pump had...

The only way I could see your g-tec being way off is if you have the wrong vehicle weight entered, or it's not getting a good rpm signal.

I used to finish super mario bros purfect every time without dying. I forget some of you are too young to have played NES when it came out. :biglaugh:

Yes, I can make a kit. I want to figure out my best option on the spark plug wires first. The ones I used are nice 8.8mm wires but I had to modify the connectors to fit the stock coilpack. It fits great now, but that wire set ratails for $89 and it took an hour to put it together. MSD may be a...

I installed everything but the na valve covers tonight. The stock coilpack harness still plugs right in to the engine harness. I didn't bother with the stock style plug boots because I am going to remove the useless center valley cover. Those only work if you have a brand new one with the rubber...

It's not like I showed the skidmarks or anything :biglaugh:

That is really sad. That sucks.

:yelrotflm I can't run that fast so you could easily get away. And another bitch I have... How in the hell can a (popcorn, hot dog and soda) combo at the movies costing $17.50 be called the "best value"?!?!? WTF about a $4.75 32oz cup of Coke says VALUE? :runaway: I can go across the...