Search results

Happy Birthday Mike.........I hope you've had a great day.

Hopefully my little phone call helped. Good luck.

UDLOSE TOSLOW 50-120 MY87GT It's easier with seven letters. We get seven and that one extra letter lets you have a lot more phrases.

I'd take it to a professional and let her insurance pay for it.

Lance hasn't been on for over a month. When I see him in March, I'll ask about this little project but hopefully he'll come on and give us an update.

Thanks guys. I talked with the tech at Snow's today and he said the two nozzles don't work better. Their tests prove that the 625 actually atomizes better than two smaller nozzles. I'm going to run it for now and see how the car likes it. He said that if it was too much, the car would act like...

Thanks for the info. Hopefully some others will chime in and give their two cents worth on this setup. I will call snow performance today and ask them what they think and make sure they understood my setup correctly. I plan on making a video with my new camera to show you how much water it's...

I enjoy working on other supras, but I enjoy driving mine. I'd rather not be working on it, but sometimes it has to be done. Yesterday I put another lsd in my car because my 3.73's were unappy and wanted to whine all the time. I haven't driven this one yet to make sure it's o.k. Hopefully it is...

Did you have an appointment set up with him? That's not like him at all to miss an appointment. Sometimes he doesn't answer his phone, but everytime I've set a time and date to be there, he was there. I hate you had such bad luck with him. There's a great guy in Sylacauga named Eric Hux. He's...

I've never had a catch can installed on my car. As for the nozzle, that's what the guys @ Snow Performance suggested. He didn't ask me how much boost or anything I was running. He just asked me how much horsepower I was going to be making. I'm only adding three more pounds of boost, so I think...

http://store.summitracing.com/partdetail.asp?autofilter=1&part=SNO%2D20010&N=700+115&autoview=sku This is the kit I'm using. It installs rather easily and it has a green light that comes on when the pump is activated so you know it is working. Here is the nozzle I'm using. It's 625 ml...

I have the ones equivalent to the 264's that he's selling now. They give you a little bit of lag early and then more than up for it on the top end. I don't know anything about the emanage but anytime you can control your timing, you'll gain a little bit of horsepower. I'm running the meth...

Thanks guys. I can easily install two smaller nozzles if this is going to be bettter for my car. I'll have to buy them but I have time since my dyno guy has sold his dyno and won't have another one ready until the end of next week. People with some brain power, please add your two cents...

I just got off the phone with the District Attorney and he said it would take two full days before the restraining order goes into effect, so that gives you two more days to harass me.............:biglaugh: Bmoss, can't put a price on peace of mind.

Empera, I won't have to draw him a picture. I bought me a four hundred dollar camera today so I'm hoping it takes good pictures. I won twelve hundred on Full tilt.com the last two days so I thought I'd splurge on a new camera. Thanks Full Tilt and if any of you guys lost a big pot to MKIIIKING...

The window washer fluid says it has meth alcohol in it, but it doesn't say what percentage. I know the stuff I'm getting from Summit has 51%water and 49%meth. I would like it the other way around, but until I find pure meth so I can mix my own, I'm stuck with this. It cost me nine dollars a...

Thanks guys. IJ, what tip are you running if you can remember.............;) Duane, It's hard to take pictures without a camera. I'm going to be on the lookout for one today though. If you're lucky, I'll even post up some pictures of me............:naughty: Fletch, I'll keep an eye on...

Upgradedsupra has ran his down the track at least a hundred times and he was making over 600rwhp. I've launched mine at 470rwhp a lot of times and never had any issues with it. I would think you'd break a driveshaft or axle before you break the rearend, but I could be wrong.

Thanks for the concern Dave, but no need for an intervention quite yet........:biglaugh: I will probably tune it friday if my meth/water gets here. I had to buy it from Summit already mixed. I'll find a better distributor somewhere and mix my own probably. I like to keep all the buds for...

I installed my meth injection kit today. I posted a thread about it in the jz section. I'll take pictures once I find a decent camera to buy.