Search results

We have a section for Other Cars - post as much as you like: http://www.supramania.com/forums/forumdisplay.php?f=142 We're Supra focused, not Supra exclusive. ;)

Folks, tone the bullshit down about 1/2 a notch please. Stop trying to create flamewars. While I'm no warm "fuzzy feely" person, and I don't demand that you are all nice to each other, and I'll certainly support you when abuse is handed out in response to stupidity, this is not the case here...

I've had 15 of my own Supras and have worked on dozens of customer and friends cars. First time I've ever done it. I've got the old housing on my work bench, the bolt is literally fused into the damned thing.

I'm sure this will offend someone. http://www.youtube.com/watch?v=MrYmTmOYcko If so, go charge your iPod, the roaches are counting on you.

I think it may have been almost ready to go break before I touched it, as I barely (and I mean barely) put any pressure on it. I was using a 1/4" drive ratchet too... Back to work.

..who designed the thermostat housing on the 7M-GTE, I will kill him. I got up this morning to go help out QYV with his MKIV. Nothing major, just wiring up the primary wires and relays, etc for the dual in tank Walbros on his T-66 car. Should have been a pleasant day. However, my MKIII's temp...

Have a happy. :)

Yup, All 4 series motors have a cast iron engine blocks and aluminum cylinder heads..

Thread closed. Jesus people, tone it down a notch...

But I do say that all the time... :evil2::evildeal:

AP source: 2 held after gun found on Philly plane By MARYCLAIRE DALE – 3 hours ago PHILADELPHIA (AP) — A US Airways employee let a passenger he knew avoid security at the Philadelphia airport Thursday and accepted a bag containing a gun, which was later found on a flight destined for...

7M-GTE SPECIFICATIONS ENGINE Valve Clearance (engine cold), mm (in.): Intake 0.15 - 0.25 (0.006 - 0.010) Exhaust 0.20 - 0.30 (0.008 - 0.012) Spark Plug Type: NIPPONDENSO PQ20R-P8 NGK BCPR6EP-N8 Spark Plug Gap, mm (in.): 7M-GTE 0.8 (0.031) Drivebelt Deflection with 98 N (10...

The 7M-GTE was an ultra high-performance engine used by Toyota in the late 1980's and early 1990's. It is part of the series of Toyota M engines. In the US, only one Toyota ever featured this engine: the Toyota Supra. This engine was incredibly advanced for its time. The 7M-GTE was simply a...

7M-GE SPECIFICATIONS ENGINE Valve Clearance (engine cold), mm (in.): Intake 0.15 - 0.25 (0.006 - 0.010) Exhaust 0.20 - 0.30 (0.008 - 0.012) Spark Plug Type: NIPPONDENSO PQ16R NGK BCPR5EP11 Spark Plug Gap, mm (in.): 1.1 (0.043) Drivebelt Deflection with 98 N (10 kgf, 22 lb.)...

The 7M-GE is a high-performance engine used by Toyota in the 1980's and early 1990's. They are part of the series of Toyota M engines. In the US, only two Toyotas ever featured the engine: the Toyota Cressida and Toyota Supra. This engine was very advanced for its time. The 7M-GE came standard...

Here are the stock and ported flow numbers of a 7MGE/GTE cylinder head. Stock: Intake liftIntake flowExhaust liftExhaust Flow.10077.4 cfm.10060.4 cfm.150113.9 cfm.15093 cfm.200141.4 cfm.200112.9 cfm.250162.8 cfm.250123.2 cfm.300176 cfm.300127.8 cfm.350179.6 cfm.350130.7 cfm Fully Ported...

The 2JZ-GTE, is regarded as Toyota's most famous engine.Development of the 2JZ-GTE was outsourced to German engineering firm, Johann A. Krause Maschinenfabrik GmbH, for refinement to meet production car homogolation requirements set forth by the former All-Japan? Grand Touring Car Championship...

The OP lost his rights to post this question when his last thread wound up on the Wall of Shame. That, coupled with the attitude he was throwing at the staff earned him a week off. We'll see if he can behave like a human when he gets back...

These guys rock*!!!!!!!!! http://www.youtube.com/watch?v=Pw8sNoodIDk *And by rock I mean, they sound like a dying moose...

This has to be a record.