Search results

^Thanks, and thanks for the rep points :)

http://www.maximumautoparts.com/SA_Charge~Air~Bypass~Valve_mo.html the second one on this page has the correct part number $26.82

http://www.maximumautoparts.com/SA_Charge~Air~Bypass~Valve_mo.html the second one on this page has the correct part number $26.82

want an excel work sheet with the formula plugged in? http://racing.generationz.net/images/isnms/valve_clearance_worksheet_with_formula.xls interactive web page http://racing.generationz.net/images/isnms/valve_clearance_worksheet_with_formula.htm you can resize it by dragging on the bottom...

http://www.cygnusx1.net/supra/library/TSRM/em/EM_08.html actually EM_07 thru EM_11

'91 grey #176, till you get a better example :)

I have only found two places so far. Both list it for $10 http://www.boostlogic.com/parts/general/general_3inch2boltGasket.html http://www.roadraceengineering.com/flangesandgaskets.htm and also you were correct, suprasport has one for $9...

with sport and override switch on, it will stay in firm mode.

Who sells 3" 2 bolt exhaust gaskets?

The mod is effectively performing the steering sensor system check http://www.cygnusx1.net/supra/library/TSRM/fa/FA_39.html Test this way: jumper Ts & E1 TEMS switch Normal=both outside leds will flash TEMS switch Sport= all three light solid Sounds like your switch is only a momentary...

I replaced my efi water temp sensor this afternoon. The one that came out was bad. It was cracked around the neck. It would measure ~1.5K ohm and if I wiggled it, it would measure open. This, by itself, did not fix my poor idle. After a little more searching, what I found was a….can you...

http://www.supras.com/

I'm still looking for the Miber but I also have this hat pin

still old ones. it doesn't have the bra on now.

come on, give it's full name Barry Hunter Garrett :D

where did you get yours for $11. I found autozone has it for $25

thanks, i have checked, but that don't mean it doesn't have one ;)

sorry, i have to back track here. our ecu outputs 0-5v, signal VF, depending on the signal it gets from the o2 sensor, signal OX. I can't yet find the voltage reference for the OX signal. as far as i can tell it is 0 or more than zero. If that is the case then that narrow band input should work...

Our computer is looking for 0-5V I am running the ZT2 but left the stock o2 and put my wideband in my highflow cat.

That is what the gurgling is. Do all the checking of hoses, cracked radiator, burping. I don't mean to be the first to blow the 'bhg' horn. As you check everything off, I hope you find it before you get to that.