Search results

Take a look at my Build thread. Now I have vibration. :-/

It's cool man. No problem.

I didn't say that was the problem, the tires were bald while the front had a lot of thread, looked new. So I am assuming someone liked burnouts and the diff went with it. Why would you add an additive, it should be fine without it.

Update, So since my turbo went bad and started to leak, I returned it to DriftMotion and Aaron had it rebuilt. I installed it and fixed the line so now it does go downward. I also had the brackets drilled to fit my Sparco Torino seats and they fit nicely in the car, a good height and the...

I got it on that exact same way now that we fixed it! Thanks!

I have a question. I got around to dropping the gearbox, and some shins were missing. I order a shim kit from DriftMotion a while back and bought a new stock clutch. On one side of the hub, you have a large flimsy shim, a flat washer and then a big c-clip. The other side, flywheel side has...

You bought Toyota fluid or silicone diff oil?

Mine was $7.50. :P

I rebuilt my fan clutch, it was worst than before. :-/

That's what I am saying. There could be a rag blocking the runners but blocking all six? Air is not making it down to the valve through the throttle body, but it is making it down there through the ISCV. Hmmm. Could be a rag INSIDE the manifold?

Ian, if the AFM was jammed, unplugging it would put it into some fail safe. It would cause the motor to only rev to somewhere around 3000RPM as a fail safe. So unplugging the AFM and trying to rev the motor, should allow it to rev but have a fuel cut at around 3000RPM. I have never ever seen...

I am in Queens, three blocks away from Acqueduct RaceTrack on Rockaway BLVD.

Very nice. I see you are a fellow New Yorker like myself...

How much boost are you running? The guy who made your catch can has a rotary spinning to 13K with a 67MM. He runs two HKS SSQV. It depends on how much boost you will be running. I say sell the HKS SSQV and put a Tial together. It is plain and simple and just works efficiently. I have seen...

Nice! I have the SAME spots of oxidation on my car. :(

Here is where I got my silicone hoses. The site might look fishy but I bought mine from here and I had no problems at all. Paid through Paypal and it arrived in a few days. They are really good quality and they give you a couple feet extra. http://www.hiperformancestore.com/HoseKits.htm#top

Call Aaron tomorrow, 10AM-6PM PST, he will help you out on what to do exactly! (909) 753-7385

Call up OS Giken...you will have no problem holding power with those. Here is the US Website, http://www.osgiken.net/products/racingmultiplate.html

Spec Twin and OS Giken has a twin disk setup as well. Just remember, using the 1JZ flywheel, it's a 7M clutch that will bolt to it and those two companies make twin disks which will hold a lot of power and is easier on your drivetrain.

:) If it is fine with you, could you post those pictures in my vendor thread, Thanks!