Search results

lol. sorry, but o2 sensor heater has nothing to do with the heater in the cabin. Though it did make me laugh(sorry, but its funny). :) Code 21 is for the o2 sensor, code 27 is for the sub o2 sensor or sensor heater. You can check the o2 sensor according to the TSRM...

I had a similar problem on mine. Put a magnaflow 24" long, 3" diameter, glass pack in where the stock resonator should be. Made a considerable difference in the sound level and tone. 87 n/a.

Hmmm... I used to get that same thing in first and second. Found a thread over on SF on ACIS, so I went through the system, cleaned out the intake(the valve and linkage had sticky spots. I couldn't close the valve all the way by hand), checked all the vacuum lines. Now it pulls smoothly...

Smelling it wouldn't work? There is a reason chemicals have a very specific scent added to them. Each one is different.

Cool, thanks for the info. Maybe I'll do a little cutting and reinstall mine.

Piston noise not hurting anything?

The oil could be coming through the vent tube from the valve covers to the intake. Blow by maybe creating to much pressure, and pushing oil through the pcv. If the head bolts weren't torqued correctly, the head gasket will have problems. The big allen bolts in the head that go to the...

Lol I emailed Bill from the battery link I put up earlier, out of curiosity as to what would happen to the battery specifically in this case. He wrote this back: "It is impossible to predict exactly what will happen every time a battery is connected or jumped with reverse polarity because...

Meh, that's not muddin', I can still see your little tires. This is muddin: http://www.youtube.com/watch?v=Aa1TlLEgL6w&feature=related (not me but...) If you ain't gettin' stuck, you ain't doin' it right :biglaugh: Here's a pic I took from where I used to ride at: Took 2 four...

Interesting.... I'll have to try that next time I need to make a gasket.

I have a 90+ 7m turbo block sitting on a stand in the shop with brass plugs in it. I could measure them for ya tomorrow to verify the size, if it would help.

Congrats. Been running that same one for quite a while now. Make sure you use new lock washers, and a little locktite on the nuts and bolts. The flange is pretty tight on the head of the stock bolts, and makes it difficult to get a wrench or socket on. Oh yeah, and it rusts quick. Wish I...

Sure you're not a tooth off on the timing belt or cps? Bad gas, fouled plugs, bad plug wires, plugged up air filter, dirty or stuck injectors, and the list could go on. Double, triple check the timing marks and cps position.

Wouldn't be surprised if the battery is shorted. http://www.batteryfaq.org/ (link courtesy Jetjock)

lol, your car is bone stock(or was), and auto. Actually, I like the auto; drove pretty good, and responded well. The work your car needs now is minor, especially compared to what you've already done. Don't worry, it'll get there :) If you're having problems, just give me a call. I'm a...

Along with some timing issues....

CRE: Good to see you, been missing your input around here. So you've noticed higher intake temps with the aluminum intake setup over the stock intake system. Have you considered coating the outside of the intake with say, JetHot, or some form of ceramic coating? Edit: Went out today and got...

True, but there is 15 years of advancing technology that could be taken advantage of. Don't get me wrong, the Supra is pretty advanced for its time, and well built as well. Improvements can be made over the stock form. It would just take a lot of research and time, which = money, and quite a...

Making sure that the parts inside of the intake aren't all gummed up from the egr and pcv systems. Both of those systems need to be in good operating condition as well. The PITA part of it is that its hard to get to the components under the intake.

I would like to see a real, tuned header made for the 7m. The OBX is advertised as a "race header," but I doubt that they actually put the time and effort into the design and engineering aspects. It's just to cheap. I've been doing a lot of research into exhaust lately. All of the experts...