Search results

Hey guys, I’m looking for any info you guys can help me with to find out what I have to do to get a cam in the .400 lift. I looked around and all I can find was bunch of regrinds with around .340 lift and the new crower 280 cam with a .360 lift. I know TED makes billet cams for lots of $$$$...

Hey guys, I’m getting ready to check my valve to piston clearance and just wondering if any of you guys ran into a problem of not having enough clearance? My block had 0.010 milled of which put my pistons 0.010 above deck, and my head had around 0.040 milled off to get a clean surface to run...

Well decided to take my HUGE crank pulley to one of my machinest to modify it for me. (lighten it) since im not running ac, powersteering. I was goin to buy a obx pulley, but i searched n read about it on here and deffinatly decided against it. so to keep a dampened pulley i had the original...

Can anyone tell me what the stock throttle body measures out to in mm. ive searched and could not find anything, or i must have overlooked it! Im trying to get a 75mm for my FFIM im fabing up and i just wanna see what the stock size is. any help is appreciated. thanks -saif

Now i know this is not a supra, but faaakkkk !!! http://www.youtube.com/watch?v=lB2qsj4Tzm0&feature=related

Sup guys, i was just driving around and saw this tiny car parked in a driveway, and thought i had to see what kind of car it is. turns out to be a 1972 porsche 914, i dunno why but i asked the guy if he wanted to sell it, and 30 min later, i ended up owning the car lol. hmm maybe put a 7M if...

I know there was a member here that does custom fiberglass center console, you tell him exactly what you want it to look like and hell make it for you. who is it. Yes i have been searching through 23 pages already and cant find anything, is it ultra7m??? thanks.

Sup guys, i just hooked up a fpr on my buddys car and for some reason the pressure stays at 15psi nomatter what i do wether i tighten the adjuster or loosen it, do u think its a bad regulator, or maybe the way its hooked up. the way i have it hooked up is i took my stock feed line off of the...

got my flow sheet back from the shop. 3 angle valve job and a full CNC job. After Numbers!! Lift Intake .500 242 .400 231 .300 216 .200 187 .100 113 --------------------------------------------------------- Lift...

Sup guys, i decided to sell my 5sp and go with a built TH350. only thing im asking is, i need an adapter plate, does anyone here sell them or am i gonna have to get my own made, i know a while back i read about someone making them unless im mistakin it for something else. i need and adpter to...

Sup guys, i just had my Valve covers cnc'd today, and i must say i like the way they turned out, Also my head was fully cnc'd by BHP performance, i will make a seperate thread about that later to see if anyone wants their head done with GREAT increase in flow, But still got to talk to the mods...

It is finaly my turn to put up a build thread. whats being done.. Block Hot tanked Honed bored .020 resurfaced also ARP main bolts Head Port n Polish basic rebuild ..(new seals etc) Resurface Hot tank Trans New bushings .. etc new clutch ( not sure which one to go...

Watsup guys, im having a problem here, my damn hood wont pop up when i pull the lever, you have to have some one pry on it while i pull the lever. i know i read somewhere either it was here or sf about adjusting the hood latch, BUT i searched and cannot find it. also same problem with my gas...

Whatsup guys, just got this thursday night, drove 24 hours for it :) its a 88 5sp turbo grey/grey. and i sold my old primered 88 :bigthumb: Now all cleaned with the new signals on.

Im posting this here, because i know some people here dont have SF account. so here it is. just thought id share i just bought these wheels yesterday. they are 17's rear wheels are 11 1/2" wide and fronts are 9 1/2 wide. the rears came with 315's tires on them and the fronts came with 295's...

Hey guys i tried searchin but nothing came up. i have an 88 turbo auto, but my auto blew. i got a hold of a 89 auto turbo trans. im sure its a direct fit, but the electronic clips, do the remain the same or am i gonna have to splice some shit. thnx in advance.

Hey guys i posted this up on SF, though id post it up here anyway. i did a full interior swap. didnt get to take pics of the complete part, but for sure ull get the complete pics tomorrow. other than that... enjoy :).... Oh yea burgandy interior for sale. lmk BEFORE AFTER...

is any body else having problems to go one to supraforums, or is it just meeee:cry: