Search results

Hey whatsup guys, Im looking around for a standalone i can install on my 1jz (from a chaser) I have searched but all i could find is (2jz) standalone for example aem. would that work for our 1j's any suggestions on a standalone, price is not a problem. pro's and con's would be...

Whatsup guys, guess im not outta the game yet! just went down to florida to pick this up. 1jz 1990 mkiii. with a r154. Interior/Exterior need alot of work yes ALOT, but the motor/trans swap was done very good. car has stock twins on it, Also the car drove perfect. I drove that car from...

Whatsup guys, Ive come to a decision that i need a break from the supra for a little while. I have done anything and everything for this thing and i just keep running into more and more problems. I am buying my brothers vette since hes trying to get out of the game, and will be parting the supra...

Many of you read the thread i started a few weeks ago. I picked up a new supra, and swapped all my stuff from the old one to the new one. all i have left is intake and wiring harness :)

Sup guys, finally i found my car :) 1986.5 N/A The supra i have now was my project one and made too many mistakes on it, body was all dinged up and brakes didnt work also had a bad differential, and the whole car had bad wiring. so i decided to pick up a diff car, but throw the built...

Alright guys here it is, Drove my car for a week with no problem at all. next morning i go to drive it.......will not start. The car cranks very strong but will not turn over. now ive searched for the past week and worked on the car and cannot get this thing to start. things ive already...

Sup guys, Im trying to get a 88 ecu pinout (5sp if it matters) ive searched all over here, forums, google and all that and all i could come up with it 89+ ecu , i found a very short pinout for the 88 but only shows inj and tps wires. thanks

I have been working on this motor for 2 years now and last night was the day this baby woke up. as soon as it started i had chills up and down my spine cuz i was so excited. at idle (1200 rpm) i was getting 75PSI in oil !!!!!!!!!!! Thats my moidifed oil system :) anyways heres a short...

Hey whatsup guys, im having a few issues here that ive been trying to work out but i just cant seem to figure ANYTHING out. My project that ive been workin on for the past 2 years is almost done, and im not sure if im missing something here or what, my setup = built motor th350 trans...

Just like the title says, im thinking about gettin a blow through carb setup on my car, instead of FI ! now most likely i will be starting a buildthread very soon, i just wanted to see what people think, im gonna be making a nice custom intake to fit the carb on along with a few other...

Few more bolts heren there and shes ready to drop in tonight :)

Sup guys, gotta question here, im trying to degree my custom camshafts on my 7M! is there any steps on how to do it on our motors, am having a hard time getting an accurate reading from the dial! like its kind of hard to place the dial in the right location to get an accurate reading! has...

bought these wheels a couple months back. i was actually the first one to buy a full set :) with a nice set of MT radials on them. the car has no motor in it, but will be dropping a built motor in this sunday! sorry its a phone pic, i will have better pics tomorrow.

Alright guys i need a little help here! We got a 89 turbo auto here that im workin on. i just installed a 57 trim turbo, ss mani, 3" exhaust all the way,fpr, lex afm, 255 walbro. anyways onto the problem. car starts up, runs like a dream, you can revv it and it sounds very strong...

sup guys, i'm trying to figure out what gear ratio to run with my new setup, dont care much about freeway driving , the car is setup for 1/4 mile passes. the car has forged lower end with all ARP studs. fully CNC ported heads Fully ported FFIM 264 cams with .345 lift cam gears t67...

sup guys, im shopping around for injecotrs for my 7m, and came across them. all info is in the link. will this set work ? will it clip on and fit the fuel rails ? thanks :1zhelp: http://www.racetronix.com/17113814FM.html

I got a good deal on a precision t88 turbo with a .96 exhaust a/r. Do u guys think thats thats overkill for my setup? My setup: Fully CNC'd head FFIM Huge FMIC Custom grind cams .375 lift Built th350 with 3800 stall Stock 88 turbo rearend i believe its a (3.92) A1000 aeromitve...

sup guys, i just finished up my GM trans adapter, its made out of 1/2 inch billet aluminum that is plenty strong. it can be used to bolt any GM trans. I'm using a Th350 trans , with a GM trans converter.

http://www.youtube.com/watch?v=bj_lIkgnfl8 :biglaugh:

Sup guys, Ive been workin on this one for a the past couple weeks. The low down This is a Long runner FFIM: I chose to go a long runner route because of our long stroke motor, which are not meant to rev too high like the 2j series. The long runner design makes more torque vs. a short...