Search results

ok i just got my Walbro in the mail and the receipt says Non-Turbo but i remember ordering a "turbo" fuel pump, i mean its 255 l/hr so i think its ok but i need to double check. thanks, -emp.

ok so i finally got them back and this is what they said... "These are marked 750 cc Injectors but flow quite a bit more, This isnt the first set of RC's the we have seen not flow as expected. The good news is, they are faily well matched. Tests were verified on 2 different matchines. Also...

so i want to upgrade my fuel lines, im think from the top of the fuel rail to that joint on the side of the block, not sure whats it called. is there a kit that anyone sells? What sizes in AN fittings are the threads on the fuel line and the joint? Any type of welding needed? ...etc...etc...

Happy birthday fucker! we gettin fucked up this weekend :evil2:

ok so im about to drive home tonite and i go to turn on my head lights...after a while of warming up i notice 1 head light down and the other up. so i turn them off and on then the passenger head light starts going up and down like crazy (while on). It didnt stop until i turned the headlights...

Ok i called RC about this but i keep getting the run around. Anyways the problem is that the injectors are flowing a lot more than they're suppose to be. Now, i emailed them and asked if it was possible to rebuild them and they told me no, that what they do is change the top o'rings, filter, and...

well its a 3 day weekend and its ruined by this weather on the eastside..dont know how much longer its going to be like this.

Well i was done with school for a while but today is the "official" graduation ceremony day. Getting ready now, its too damn humid to be wearing a tie. Oh yea i went to Cittone for Network Systems Administrator, i just need to cough up $$$$$$$$$ to take those tough certs. :icon_conf Just...

well im sure this has been covered many of times but here we go again. I just installed my WB probe (had it welded right next to 02 sensor). It was reading at around 15.-- initially but when i reved it went wayyy lean...this might be because i have a big exhaust leak right where the turbo/elbow...

ok i finally got my manifold back (more updates on that later) hooked up everything, atleast it looks like. Went to crank it and it didnt do Anything...no cranking...nothing... only thing i really did was extend Cruise control harness, installed a couple of guages and installed/wired a SAFC(2)...

Ok i've begun on a project that has no turning back...Im relocating my climate control to where my armrest is. So far i've extended and soldered the smaller wiring harness for the CC and I've made a quick cover for the climate controller itself. Im placing my SAFC2 and my EGT where the CC used...

so yea i might be getting one of these for free as a DD...or something for a while. Going to take a look at it either next week or sometime this week. Only thing is...i cant find any pictures or much info. on the cutlass wagos, so this should be interesting....are they that rare?

ok i bought an autometer EGT gauge + probe. My problem is i cant figure out wat is the size of the bung where the probe screws on to. The bung itself screws onto where ever i tap a screw in hole for it. I thought it was 7/16th's but it still not a good fit, it gets tight but there still would be...

ok so i got a dent on my hood where the cowl starts (long story) and i was going to try to get a slightly larger cowl and mould it on to my existing hood, nothing too big of course, so my question(s) is are there any cowls out there that will fit ok with a little fabrication* .Also has anyone...

http://youtube.com/watch?search=call+on+me&v=2uxiRWXz1Bo enjoy :naughty: -emp.

hey since i dont have my manual and will be installing this shortly. I have a few questions for anyone that can help. I know that i only need Black and red for ground and power. But how do i use the blue for datalogging? i have a spare Serial port connector but wouldnt have a clue which pin to...

ok i have the diagrams for the ECU, i have the VPC installed and i have an extension harness spliced and ready to go...just need to know which colours go where, which im sure i can find, but my main question is...how can i incorporate the SAFC 2 and the VPC since i know the vpc has output for a...

ok im in the market for a wideband and i've pretty much narrowed it down to Innovate's LC-1, seems simple and has datalogging...which is pretty much all i want OR the AEM 6in1...which is also simple and easy to use. They're both AROUND the same price the LC-1 might be a bit cheaper if i get the...

the faggots were running after the styrafoam* and there was a red pre89 with sawblades in the parking lot, with a wing, so maybe turbo? anyone see this? repost maybe?

ok so i was on my way to pick up my new IC from ryan's house when i came across a random car show hosted by the "Latin Cruisers" when i was about to keep going i saw a white supra, kitted, and with lambo doors. Couldnt find the owner but the car looked clean...nothing done to the interior or the...