Search results

A little exhaust work done, this thing sounds amazing straight piped with a small glass pack! All bolt on and easily swaps out with my muffler for street driving Sent from my PC36100 using Tapatalk 2

cant wait until its on the dyno again, now that i finally have a new clutch! i also ordered a block adapter, remote filter head, 180* oil thermostat, big oil cooler, fan, and hoses/fittings from summit racing time for a good free flow oil system setup :icon_bigg :naughty:

Clutch and transmission are back in ready to get broke in. Oil and filter changed and ready to go. These fumoto drain plugs really make changing oil a breeze! Sent from my PC36100 using Tapatalk 2

More goodies Sent from my PC36100 using Tapatalk 2

I'm actually doing a v band setup that connects at under the differential so I can either run my muffler, or straight pipe I'm not running any cats or anything, straight pipe to small glass pack, then hks hi-power muffler Similar to the picture below but being able to run my muffler as well...

Picked up some exhaust parts as well all v band Sent from my PC36100 using Tapatalk 2

Thanks! Got the transmission pulled and flywheel resurfaced ready to be put in with the new clutch and pressure plate. I also got a viper 5704v alarm system in getting installed this week. Also got a turbo blanket that actually fits Sent from my PC36100 using Tapatalk 2

i looked through all the posts, i may have missed something. but is this kit being offered with plate,coils, and or harness/wiring diagram? i would love to have this on my car

Google Chrome Sent from my PC36100 using Tapatalk 2

i registered but cannot get the cover photo to upload, it only loads about 5%

Act stage 4 clutch and extreme pressure plate came in from drift motion! Time to throw this bad boy in, break it in, and head to the dyno! Sent from my PC36100 using Tapatalk 2

oil return line from the turbo? im using a -10an line and fittings with -4an feed. driftmotion sells a great kit for the ct26 http://store.driftmotion.com/static/i-ct26oilsoftlinekit.php much easier to install\remove than the factory hard lines

im running -4 feed and -10 return like indigo said. i purchase all of my fittings and lines from siliconeintakes.com, they have really low prices and good quality parts. still saving for a clutch but the car runs great, especially in this cold weather

Reupholstered my door panel trim pieces in black Swede. I think they turned out pretty good I also reinforced the armrest with fiberglass Sent from my PC36100 using Tapatalk 2

Finished product Sent from my PC36100 using Tapatalk 2

My door panels were pretty bad so I added a little fiberglass reinforcement where your arm rests. I also took the carpet out and added Swede to the panels. I've never done this before but I thought it turned out pretty good. Just got the passenger panel done for now Sent from my PC36100...

Wrapped my gauge cluster bezel sp* today. Turned out pretty good Sent from my PC36100 using Tapatalk 2

Stock pressure plate and I believe its a heavy duty aisin clutch. Not much better than stock Sent from my PC36100 using Tapatalk 2

i know haha, just trying to stay on the same dyno each time. just catching my buddy with some free time is a little hard well sad news, i was chasing down an older corvette yesterday evening. to try and catch up to it i floored it in second up the on ramp onto the highway and my clutch started...

purchased and installed some used drag slicks