Search results

Hey everyone: I'm looking for hardware for my engine. I need to know what these parts are called. I might need to get them from the dealer. The first two pictures is the hardware for the intake tube where it says "3000" I need two of them, dont need the groments. The last picture is the air...

The wire loom that runs along the intake manifold, and up and over across the front, and on top of engine, does it over or under the breather hose near the alternator? again thanks!!!

Hey everyone, Thanks for your help, I know I'm a P.I.T.A. but I appreciate your help: I have two sensors that look identicle to each other and you can also put each sensor in either the water jacket housing or the thermostat housing they will both go in either port and will screw in easily. One...

Hey everyone, I took pictures of my throttle body so I could reassemble it later, but I was a complete dumb ass, I took pictures of the throttle body but I didn't even brother to check to see how the pictures turned out, when it was time to assemble the throttle body, when I looked at the...

conflicting answers: I've gotten 180 and 193 what's the stock factory thermostat temperture?

when I'm standing in front of the engine bay looking towards the back of the car the drivers side should be the "right" side, which side is the "right" side looking from the trunk looking towards the front of the car, the passenger side?

When your a newbie this is what happens: You don't pay attention hows things are installed and which direction they are facing. I have pictures of the components of the fuel tank assembly, the sender, pump hanger, and the breather (vent) tube. I need to know the correct orientation of these...

When your a newbie this is what happens: You don't pay attention hows things are installed and which direction they are facing. I have pictures of the components of the fuel tank assembly, the sender, pump hanger, and the breather (vent) tube. I need to know the correct orientation of these...

What is the normal fuel pressure at idle? Mods: 550 injectors, Lexus A.F.M., 255 Walbro, 57 trim.

A while ago I saw a member here that had a boost gauge that was very very nicely re done, the face was of the dial was reprinted and probably re calibrated so that it would read higher boost pressure, and it was in the factory placement, also it looked factory. Where or how did that person do...

As the title say's How do you clock a power steering pump??

I removed the adjustable linkage that connects the throttle body to the bell crank that sits on top of the valve cover, does the adjustable end connect to the bell crank or does it connect to the throttle body? Also what is the factory color is the top of the bell crank, it rusted so I don't...

I'm thinking about getting tube type manifold, yes, I know it doesn't add performance. I know there are cheap and expensive ones. Does the expensive set fit better? I know there are issues with the cheaper ones. Does tubular manifold make the car louder and do you have to reconfigure your down...

I feel like a total idiot for even asking: I'm removing the heater tube that is behind the exhaust manifold and runs from the block and thermostat housing to the feed and return line from the heater. I can see the top tube goes to the top of the head and the bottom line is a the mystery where I...

Does the earlier model spoiler (not the three piece one) come without the third brake light?

I live in the Ventura county area, I'm looking for a smog shop that is forgiving and understands the difference between illegal high performance mods and polished parts. Polished doesn't mean illegal, I got busted for a Lexus A.F.M. If I hadn't polished it I would have passed, honestly I don't...

Where do you guys recommend buying a Walbro fuel pump?

Hey everyone Happy Sunday hope everyone is Good and Happy Cinco De Mayo weekend: I'm tightening my cams today and I have a tightening sequence as 7.6.1.4.3.5.2 and foot pounds of torque is 14 isn't that a little low and do I need to divide the foot pounds in thirds or should I go straight to 14...

How does the cam journals get oil? I only see one oil hole in the cam journal at the rear of the head.

What is the black foam rubber that is sandwiched between the jute padding and the thick dense rubber backing and is it sound deading material? where do I get new stuff or should I just get Dynamat?