Search results

they go one the fuel rail and hold a hose that supplys fuel to the cold start injector. i need the one that goes on the fuel rail and the one that goes on the cold start injector. i can oreder them for 20 bucks at toyota but i would rather see if anybody has extras that i could purchase for cheaper

The other nite i was driving my supra home (it was sleeting really bad) and my exhaust has been off. so i decide that today of all the cold ass days to put it back on. Now i went to put it on, i got under the car and low and behold the catalitic converter is is freaking packed solid with ice, i...

i was just curious about what grade of fuel to run my dad says just run regular but i told him no its a turbo car it needs premium just like his cadillac. and if it is premium (and i know it is) explain to me why this is important so it can be explained to my father and end this dispute

hey guys i got my car running like a champ now. i got all the water hoses tight and injectors are in order everything is good except one little leak. its behind my timing cover i dont know if its from the water pump or a freeze plug or maybe there is a gasket that could leak back there i dont...

how do i know my injector plugs are plugged into the right injectors. i got the vacuum lines all together and now its surgeing to almost dies to running fine. it will also backfire or pop thhrough the exhaust and smooth out when you hold the gas

ok i got the motor in today and started it up it ran ok for a minute and idles fine till i took it off the jack stands now it will start and run for a few seconds but at a really rough idle. i checked all my grounds and my electrical connections every thing is hooked up. some of the vacuum lines...

yep i just got to bolt the tranny brackets in place and check my grounds fill her up with fluids and crank her over i hope it starts i put it on tdc new timing belt hoses ect.. wish me luck any last minute tips

i lost two converter bolts for my car i still have 4 and i have ordered 2 from toyota but they won't be here till wednesday i bolted them in as follows i put 1 in and skipped a hole put 1 in skipped a hole till all four were in the converter and flywheel?flexplate whatever they call them i've...

i lost two converter bolts for my car i still have 4 and i have ordered 2 from toyota but they won't be here till wednesday i bolted them in as follows i put 1 in and skipped a hole put 1 in skipped a hole till all four were in the converter and flywheel?flexplate whatever they call them i've...

hey i've got a rubber fuel line with a clamp coming off the block it the return line where does it go it comes from the fuel rail

so we got the motor in lastnight and it went pretty smooth i didn't go down wothout a fight but we wrestled it back in place my next task is to put the intake on bolt the tranny mounts and what not any pointers for me out there i want this to go smooth i going to have about 8 hours to get it...

i was wondering is there going to be a meet in missouri i know there is going to be one in indy but is there one closer to kansas city????

i was told there was i want to hear it where can i find it lol

what do you guys think is easier to do put the 7m in the car with the transmisssion bolted to the engine or leave it in the car and wrestle it around i'm putting my motor back in tomorrow and would like some advice on the subject. and also is there a way to clean the turbo bearings out to make...

hey i was wondering if any body knew the stroke leangth, combustion chamber volume, my block is .40 over, stock mhg thickness, heagasket bore diamiter (stock) piston to deck clearence(stock) and valve relief. i need this figure out my compression. thanks

ok i found this company the other day and he can get you almost every thing for your supra i got my pistons and rings and wrist pins through him for 200 bucks and they are good quality pistons give this guy a shot he overnite most things for 14 bucks here is the number 1-828-633-0226 its called...

ok the machine shop has had my motor for 2 1/2 weeks and nothing is done he was supposed to bore it hasent, supposed to paint it hasent has ordered the rod three times and still doesn't have it. wants to replace the intermidiate shaft bearings didn't oreder them till yesterday and they are in...

will a 7mge timing belt fit the 7mgte??? cant find one for my turbo motor but i can for the non turbo motor

my favorite episode on dirty jobs was when they were in hawaii and the camera man troy got his hair stuck in the line he was using to repel down this sky scraper and then the motels owner's dog was a freak lol no hair chiuhuha man funny had me rolling.

ok i found an afm from a sc400 with a v8 should i install it now with my motor stock or wait until i get the injectors and wideband o2 sensor. i mean if i put it on my car is it going to run to rich lean or the same. i also found a 3000gt at the junk yard just happens to be a twin turbo but the...