Search results

oh well, i guess i'm on the look out for an sending unit then. thanks man!

yea i did hear something about that after i had the head together. hopefully it wont be anything serious. if i just change the USDM connector so it'll fit on that, why would it be a problem?

LOL that's funny

1)i see what you're saying, i'll check my NA motor and see what i can steal off that 2)well, i'm gonna keep them capped mainly because it looks better =0) 3)so, could i just pretty much block off or loop the other nipples like the one thats on the back of the upper intake manifold? 4)so, a...

it looks ALOT better ON the motor...check out my build thread -t3d

yea it does actually thanks alot

MOAR!!!!!!!!!!!!!! so i took somebodys advice and replaced those zipties with clamps :biglaugh: i capped off the coolant ports on the TB i capped this one off, but didn't feel that vacuum caps would hold under the pressure and heat, so i did this... :naughty...

that's the one

if you're talking about the one on the coolant pipe thing, i'm already in the process of that. i just got to trim the bolt down. it's hard to find a bolt that big and short. thanks man

thanks man! there's plenty more to do, trust me. but that means MORE PICTURES TO GO WITH IT! .....told you i was picture whore :biglaugh: -t3d

i was thinking that, i'm still wondering on which vacuum ports go where and which ones i'm going to blocking off. :aigo: so i can just block the nipple of the waterneck then since my JT61GT is just oil cooled?

i see what you're saying, but it has the feed hole to measure the pressure. the wierd thing is the connector for the oil pressure sending unit on the harness is for the one you're thinking of. but if anything, it's just a connector, so i'm just going to cut it and put on a female connector to...

haha i did the same thing. loooooking GOOOD! -t3d

i do have a couple questions though... does the bottom nipple on the TB connect to the nipple on the pipe? and does the other nipple connect to the nipple on the water neck?? would it matter if i was to block them off? advantages? disadvantages? thanks!!!!!! -t3d

here it is...ALONG WITH MORE PICS!!!!!!!!!!!!!! =0) see! that's not a knock sensor! MORE PROGRESS PICS! throttle body installed along with new NGK spark plugs new SS CSI line from DM.com :biglaugh: still working on the harness... that's right i got BLUE...

wow... you should of found the owner and asked him what he was thinkin:aigo: -t3d

lol tomorrow you will see

lol thank you! ^^^^ jayson, if it will make you feel better, i'll take a closer pic on monday and show you :biglaugh: -t3d

lol 'cause you're blind! its the oil pressure unit with like the male electrical connector

MORE PICS! started putting on some of my blue vacuum lines. it all goes together! thoroughly cleaned and painted the throttle body painted and installed the water neck installed new hose. that one's a bitch put my new NGK wires on the coil pack...