Search results

:( I figured Toyota was going to release something soon to respond/compete with Nissan. Yes, the few prototypes I have seen were ugly, but most prototypes are.

Again this is the first time ever using a FFIM, larger IC, and larger TB. All of my experience with my past supras' and 7m, have been direct swap. 7mgte for 7mgte using direct bolt-ons. Greddy TD06,RX-7’s 550's, AFIC, AFPR, exhaust, ect. Just bolt-ons, never nothing this involved when...

k Facime well if your are talking about something other then a broken wire from the TPS to TCCS OR the TPS not being adjusted right, what else are you trying to say??????? The TCCS is shot? (I can highly doubt that the ECU is shot but wont put it past anyone, again this not been brought up...

PVC and 10' of 3/8 rope were GREAT tools when I replaced my valve seal back in 2002. It worked like a champ.

Thats just shitty of them to sell the car on you when you told him you were on your way down. When I bought my I was pre approved and everything just like you. The only thing I did put down $300 on my C.C. to "hold" the car for me tell latter on that night. Other wise they couldn't guarantee...

If you got .040 over, and do what you are planning on to the head, you are going to hava carbon copy of my entire block/head. (Minus the driftmotion oil tube) LOL

Yep JEGS is where I ordered mine from. Summitracing, had only 1 set in stock at the time I was ordering them. :( This is the first time I have read this thread and reading what Rich said: I am thinking GOD DAM IT MOTHER FUCKER!! I am using BC stage 3 cams with my comp. springs. :( I...

^^^ I under stand. Adjusting the TPS is easy as hell, I have done it, check it 1000 times in my life. I have swaped more 7m's in supras' the last 11 years then you probably have owned cars. This is not my first time. How ever this is my first time I have done a swap and had a code, that I...

^^^ yes I agree 100% on closing a thread properly like he did. But a better title would be nice. Thats all.

I have search for one and couldn't find one so I made my own. This was made using data collected from the 89 TEWD, and it should work for 89-92 supra's. Now It's here to share. -Rob

K so 75-80mm for a stock ct-26. Then once my turbo is installed I need to upgrade (chop up me FFIM) again to fit a Q45 or something around 90mm TB, since it will flow more air? I should ask sethron, or Ron R. if they know that FFIM's with 90mm TB wont work with a ct26. Seems like a lot of...

But lets say in one month( or later) someone is having the same problem and they try and search it out. There NOT going to find this thread because of the bad title "help i dont know what to do ". People search syntoms not "HELP, I dont know what to do". I wonder what would happen if one did...

I would make my own a lathe, out of 6061 alum. But I am guessing summit racing, call them it's a free phone call, or just google it if I were to buy one. GL

LOL JK here is the wiring color on my 89 for what wires connect to each other. Harness side------CPS Side RED----------------GREEN BLUE---------------RED BLACK--------------WHITE/ LIGHT YELLOW YELLOW----------- YELLOW (BOTH ALMOST TAN)

IC piping is as follows for now. Yes CT-26 for now, just for start up/brake in and to ensure the engine was built "right". Hot side is: 2" piping, next a 2 to 2 1/2" coupler to IC. IC has 2 1/2" in/out. Cold side is: 2 1/2" to 3" coupler. 3" piping then a 3" to 4" 90 degree coupler to TB. I...

Rule of life: Thay will single you out if your not normal, or driving normal. Example from my life (another) : When I first bought my Telefonica GSXR I was pulled over for riding 63 in a 55 in Minneapolis on 35. I was in a the middle (20-30 cars around me) lane just keeping up with traffic...

$$$ no object at this point of the build, if you get my point. At least not $250. But if a cheaper one will work I will go with that. I say 100mm because the TB I have mesures in at 4". But as we see it is no good. I am open to options, I just dont want to replace it later because my TB...

FYI, i only pd. 5.99 for each can. I bought 2 because I was going to tint the world LOL. If you have a buffer you can make them super smooth with a little 1000 grit buffing compound stuff.

Yep 3 coats of that stuff + 5 coats of rattle can clear. Works really good I think. All though I wouldn't trust my self doing a large area like tail lights. Its in my build thread, lol. Had to throw that in there I dont have many hits. :3d_frown:

Is this at least adding or the cause of the problem? Thank you jdub. Should I source a q45, or one of those blue 100mm TB I see from Bangkok that use a stock TPS? Here is the Bangkok TB Facime-- did you see the pic after I added it?