Search results

  1. jdmfreak

    Replacing valve shims

    If you go down to Toyota and ask for shims they will ask you what thicknesses you need if that makes sense
  2. jdmfreak

    Replacing valve shims

    Yes but you will need to determine how thick of shims you need (thickness of current shim) +(whatever you need to bring it in spec)=thickness of shim you will need to buy for that valve
  3. jdmfreak

    Replacing valve shims

    I added to my last post probably while you were typing
  4. jdmfreak

    Replacing valve shims

    The shims are all different thicknesses so even if you order new ones you will have to know how thick they need to be and every one will probably be a different thickness If I am following you is sounds as if you are under the impression that all new shims are the same correct thickness and...
  5. jdmfreak

    PacNW Supra sighting thread

    11.30 am hwy 99 Northbound near klinline pond red pre89 mk3
  6. jdmfreak

    ffim discussion

    I would suggest also offering a throttle cable and some way to attach it to the stock throttle body as I have a ffim and am having a difficult time finding the best way to do this
  7. jdmfreak

    PacNW Supra Nationals 2014

    Yeayeah I'll be there with bells on!! This year I might actually be running hot:-) new goal :complete turbo block by June, break 700 hp, compete with a slight chance of winning :-D
  8. jdmfreak

    New Coilovers!! HELP!!!

    What is wrong with them? And are you talking about Meghan in general or specifically one of their coil overs (ez Street vs Street vs track) Just wondering because you are the first person I've heard that despises them
  9. jdmfreak

    Race Ready 7M

    Haha hadn't heard the official date till just now :-)
  10. jdmfreak

    jdmfreak's A NEW BEGINNING (BUILD THREAD)

    Freaking sweet:-D
  11. jdmfreak

    Guv'na's Tavern

    Bird seriously start a new thread so they are all together these stories are too freaking good to get buried in this nonsense
  12. jdmfreak

    Megasquirt 3 with MSextra and stock CPS

    Sweet your set then... I have a bunch of extra shielded wire if you need any it's kinda thick but it'll work good
  13. jdmfreak

    Megasquirt 3 with MSextra and stock CPS

    Sorry what I meant was Do you have the knock board in the ms3x?? If so and it's wired to the spare outputs those wires will need to be shielded as well:-)
  14. jdmfreak

    7MGTE Oil Pressure Problems

    Do you have the stock hardline from your oil pump to the block? Or a soft line? The softline ones have been known to cause issues
  15. jdmfreak

    Guv'na's Tavern

    Faye... Your blowing up the forum :-P