Search results

My bad I should've clarified myself. I meant because the odometer is only showing like 300 miles and I have actually gone 330 miles, I'm getting a little better mileage than what the car shows. I know all about bigger tires, shoot I haven't run anything smaller than 275's since I got the...

That's crazy it should only cost you about $50 at the most to have it welded with a flange. But are you sure that the cat is what's making you fail emissions? It sounds like something else is hindering you. Because a properly tuned car with no cats will pass emissions. I work really hard for...

Great thanks, So I'm getting a little better gas mileage than I thought that I was. I'm driving my car all over with the new job of mine.

If you search under Poodles name you should be able to find a pic. Why don't you just take your exhaust off and to an exhaust shop with your new exhaust and just have them weld on a flange for your cat that you already have? They can just cut the cat off then weld on the right flange, should...

I'd be in for a set of rings and brackets! I have 17 wheels so it should be fine. Let us know when to send the money!

Damn Sean, you all over it huh!!! Get some stock wires or the NGK's either one, the NGK's should be a little cheaper though. You can go to any muffler shop and have them build you one, it should only be like $120. I just got a quote for a 3" installed for that. Is there something wrong...

I have a question for you guys, I have 275/40/17 BFG Gforce Sports, and I went on a trip to a couple of my stores and Mapquest and google maps said it was about 365 miles when I got home from the trip my odometer said that I had only gone 339 miles. Just trying to figure out why my odometer...

Just order them from oreillyauto.com and Raptor Racing is a vendor from the forums in the vendor section.

Do you have an Oreilly's near you? You can get the plugs from them and order some wires as well. Get the cat like Poodles said from Raptor Racing.

OK, get the NGK coppers and you'll be fine for over 10k miles. If you want to waste the money on the Iridium's you can, but Coppers burn better. Gap them to .30, you need to gap the plugs. There is a vendor on here that sells high flow cats for $129, that has done a great job. You can...

I'm in the HEB, NRH area.

Anyone else wanna go? Poodles, I'm sure that you can bunk with any of the other guys there. Manly it's going to be the gas there and back and some food. I'll be leaving on Saturday morning from the DFW area at 7:30 am

Showed up I guess right after you guys left! Brought the sup and everything! All well, maybe next time. The meet was ok but when I got there, most of the cars had left. It was a good turn out though for the MK3's.

Where in TX are you?

If you're asking about the engine itself it came black, if it is silver or gray it has been painted. The gasket color is black from Toyota. I did my oil pan gasket with the motor in the car and I had to remove the tranny and just loosen the motor mounts and take them off and then replaced...

Ok, the problem with the steering persists. I have ruled out the wheel bearing, Checked the rack, it's not leaking and is tight, Checked the lower ball joint, and it looks like it needs to be replaced, ordered a new one for both fronts. Will be getting new front shocks, Bilstien, Looked at...

Not necessary at all. These turbos spool up really fast. I don't think that it's worth the extra $800 for an 200-300 rpm spool faster. Get the Boss turbo anyways, it has been proven time and time again to be better. Get it from Suprasport, comp turbo or from Jtamulis. Either of them would...

Well I have a couple of people now wanting to go. So you should come out on Sat with us. Maybe bring Poodles too.

Just go get a job at Home Depot, I'm thinking about it as a part time job. A friend just got a job there and he's making $13/hr for part time.

Wow No one Else wants to go to this from DFW?