Search results

im going t56. this is the t56(40k miles) next to one of my broken r154's. more pics here http://s5.photobucket.com/albums/y155/williamb82/t56/ t56 1st 2.66 2nd 1.78 3rd 1.3 4th 1.00 5th 0.74 6th 0.5 r154 1st 3.251 2nd 1.955 3rd 1.310 4th 1.00 5th 0.75...

this is a writup i did for celicasupra.com with various info ive read all over the place and pics if found or been sent by various individuals. just figured you guys would like to see it. btw, my mkii is front sump so a couple lil things wont apply directly to you mkiii guys. here it is. ok...

i got pics of a really nice 7m vr sensor mount for the trigger wheel i had made. it consists of 3 peices of ss welded together. i prolly wouldnt to stainless for cost reasons, but if i could get the peices drawn in cad and cut, i could fabb the brackets and sell them to those that bought the...

well, had a court date yesterday. i got 4 citations for animals not having their rabies shots awhile back. problem is only 1 of them was mine. the other three were my brothers and sister in laws. well, i got the shots for my dog. went to court and showed proof. still got fined $135 since i didnt...

ok, just got of the phone with a shop that can make the custom flexplate to allow the use of off the shelf gm convertors. it will require me to send a stock flexplate so he can reuse the ring gear, but other then that itll be all new parts. and i let him know it will need to be sfi approved for...

does anyone actually approve group buys? i sent a email and a pm to the name and address listed to get a group buy approved. ther pm yesterday and the email the day before that, no response at all. anyhow know who i can contact to get one approved?

http://www.tamparacing.com/forums/misc-automotive-sale-wtb/295264-tig-welder-f-s.html#post3032860 its an old miller 320a/bp but has the high freq, a new water cooled tig torch, the old air cooled one, the foot control, etc.. its a heavy sob but will get the job done, now i can start...

i need to know what the thread pitch is in the block where the oil pump feeds oil to the main galley. i plan to install a 10an fitting there, and also in the pump outlet so need to know that fitting size as well. that way i can run a 10an line from the pump to the block. tia for the help. i...

http://www.cardomain.com/ride/2042690/1 more pics. on page 5 are pics ofthe electric fan install. i ended up leaving all but 1 stock bracket on the fans and drilled holes threw them and used self tapping bolts to attach it tot he brackets the stock fan shroud attaches too. then pics on page 6...

more pics on the car domain pages. start at page 4 on the black 84. and the last page for the 85. got more parts then that but thats the pics that are developed so far. got some contour fans ill be installing soon and will take pics for a writeup on that. and i have the yoke assembly for the...

my adaptor. bolts to the front pump of a th350 or th400 and then the stock a340e bellhousing bolts to it. pulled a th400 yesterday. grabbed it out of a 1972 oldsmobile delta88. its a long tail(33in long), though id have prefered a short tail version(28in long) but where...

ok, found the info i was after on a cam mfg's website. now we can get reground cams and know what we are getting. schnider does regrinds for $100 each if you send them cams to be reground, or 935motorsports sells them outright with no exchange for $400. the effective duration might be diff from...

well, the coils i have are old and tired. im wondering if anyone has used these coils to replace the stockers. i figure id use 7mge msd wires and then mount these on the firewall. these should have a better spark then new stock coils and are much cheaper. opinions? id prolly opt for the msd...

wheres the cheapest place to get wiseco pistons for the 7mgte? part # k613m84 they are 1mm over stock comp. i figure since ross pistons have gone up might as well spend the little extra for the wiseco's. cheapest ive found so far was $650. im sure there must be somewhere that has them cheaper or...

just an fyi, 830cc/min injectors are too large to use with the maft on the 7m. ecu just cant pull enough duty cycle under 200hz of airflow for it to run properly. over that car runs great. im going to get an adj fpr and lower the base pressure 5psi or so to lower the injectors flow. friend of...