Search results

It does'nt matter

As in what JJ has stated,my cars leather is 7 years old. It is ivory in color. Zaino #10 leather in a bottle and leatherique pristene clean and leather rejuvenator has kept it new looking and clean, as in no cracking what-so-ever. I also use the zaino on the plastic/vinyl surfaces.You will get...

OK, sir with the common sense, you still did not tell me what you would check if you're oil temps were running on the high side.

OK, you're oil temp is starting to rise. What are you going to do about it? Pretend you don't have anyway of checking the coolant temp. What are you going to check? Are you going to check you're cooling system first? I bet you will.

I knew this was going to happen. Don't be so defensive. I stand by my post. Are we talking about race cars or normally/agressive driven street cars? 99.9% of the people on this message board, myself included do not drive their vehicles on a race course. If these posts are dedicated towards a...

This is only my opinion. Water temp without a doubt. A quality oil will take care of itself. Under most normal conditions, the oil temp will mirror the coolant temp. Here is what I think is the most important----Gauge placement. Why have any gauge if you can't see it at a glance, or a shift of...

Check out fel pro, check the website.they say that their seals are up to par of toyota, might be teflon/viton. You can buy them at most auto supply stores. Toyota does not make their seals, they are farmed out to suppliers.

thanks, jj it was the 100c temp that altered my findings. Yes, I do have a cabin pressure gauge.

jetjock, do you mean 2 seconds instead of 2 minutes?

fiberglass packing

I also have both books. it's a little rough to spend that kind of cash on a book, but having those books handy has paid me back ten fold with ease and accuracy of repairs.

That is a Ford starter relay, and by the way it seems to be wired, it is not for you're starter circuit.

I had this setup for the last five years using autometer gauge cups. This gauge arrangement is old school. A very nice way to do it so you can actually see the gauges at a glance.

The wheel might spin freely with a bad bearing without a load on it, but it won't run smooth, gauranteed. Please tell me how a bad speed sensor can cause a wheel vibration?

A crown vic cop car is just a stock car equipped with a towing package. heavy duty suspension, charge system, maybe a larger radiator, oil cooler. that's really about it. engine, trans and rear are stock items. It is hit and miss on the quality of a used one. The patrol cars get beat up pretty...

It also looks like the 1J mount is worn, broken, compressed.

When you get some free time, perform a compression and leakdown test. The results may give you some needed info.

I would never do that kind of stuff to a supra (lams) but at the very least, the guy certainly is not a trend follower or a trend setter for that matter. NEWS FLASH..... Lams spotted in Home depot parking lot with cash in hand..... Stock up .78 cents.

I have them with the springs, smooth and quiet. HKS tems, Perfect for my needs. I don't have a race car, just a well handling whale.

You're right, kinda. My way is the anal way. This is why I said that. Just suppose, what if, the rack seal has slowly started to leak on the good boot side? If it was, all this work and money shot to hell. At the very least, peel the large end of the boot back and see if there is any leakage...