Search results

Well I used to be on here alot quite a long time ago. Had a 1990 Supra turbo 5 spd. You can look at my build thread coming up. After selling it and going through many cars, I bought about MK3 supra. This time its a 1992 Turbo Targa, needs alot of help but dont they all.

Me and a friend came up with the idea to make a small forum for guys to get together and discuss whats up. We call it Broke Boys with Toys as we are just a bunch of kids trying to keep in touch and share our rides. We just got the forum up today so check it out. We are based in oklahoma but are...

Well I sold my supra as some of you might know...Wishing I hadn't and looking for another I had to get something else other than the 13mpg in the chevelle and worrying about it every time i park it in the school parking lot. Well heres the even badder news I got a 1991 Base Geo Storm yes that...

I found an 82 Supra that a guy is selling for $650, Just wondering what info you guys can give me on the 82 model year?

my car has the power drivers seat and everthing works but the seat back adjuster button is broke off, I can use a screw driver it adjust it if i need to but thats a pain to do. Has anyone had this part of the seat apart and can tell me ifjust that part can be replaced? Or does anyone know where...

Car hasnt had working AC for a very long time, I bought the o ring set and went through and replace all the O-rings, and dryer bottom, Put on a retrofit kit pulled the vacuum and put in some of the oil. Put 2 cans of freon in and while doing that I just ran power to the clutch to keep it...

Bout damn time, New engine now dont know if you all remember but my new rebuild engine had a bad piston and screwed up the whole block Installed a new 7MGE block which was drilled for Turbo and its runs great, im liking the extra low end that the higher compression has. RUNNING GOOD BUT ITS...

Weve got a club in tulsa that we are trying to get going and we need members, If youd like to check it out we have a bunch of pics and a forum on the website. www.tulsastreetscene.com This is a club for everyone, anyone not just tulsa area members can join the forum. Also just wondering about...

Just wondering how much it woudl cost and how you packaged it?

Ive got a 7MGE block that I pulled from an 87 non turbo car and Im gonna be building it to replace my 7MGTE block that totaly screwed up after even being bored and new pistons put it but that a whole nother story. Well Im gonna put everything thats in the 7MGTE block in the 7MGE block. Except...

I got another std bore 7mge and while taking it apart I noticed that it only has one knock sensor and has no oil sprayers. Its an older 87 7MGE and Im gonna use just the block to replace my 90 7MGTE block the had a piston melt and screw up the already bored cylinders. Any thoughts on what I...

Well Thursday when I was coming home from school the car started Idling rough and smoking alot well I was like oh shit here goes the headgasket. Ever since ive gutted my cats the car smoked, from oil and I always thought that it was the turbo seal that I didnt replace when I rebuilt the turbo...

I was wondering if it would help when i pull my turbo off for the seal replacement if I smoothed out the inlet and outlet on the compressor housing then polished them out. I noticed a half psi gain from just honing out the 3000 pipe and polishing it and the throttle body. So would smoothing...

This is on the 89 Iroc TPI 350 We changed pulleys this weekend to up the boost. we were running at 6-7psi and now we are running at 9-10psi. Once we got everything fixed up we went for a test drive. It sure pulls hard but in third on the hard pull the car starts lurching Like the computer is...

Just wondering whats the usual speed at the 1/8th mile track in a stock turbo supra?

91 Z28 350 TPI Ported and Polished Intake FlowMaster 3in exhaust K&N Filters Shift Kit and 3:23Posi Rear We went from a 10mph roll I let him get the jump and I was in second He went and got a 1/2 car lenght ahead and my turbo spooled then i was catching him then I shifted to third he...

Well this weekend I gutted my cats and boy did it ever help my car, it sure pulls hard now through the entire rpm range. But now im getting a bunch of smoke. Its hard to tell what the color really is because of all the really windy days weve had lately. It looks white but it doesnt smell like...

Well I pulled the plate behind the cam gears to look see about an oil leak and I notice theres oil all the way up to the cam seals but the most is down on the head. Well I figured it was the head gasket but now im second guessing that it might be the cam seals. They were replaced during the...

I was getting a code 51, the idle was at like 1500 and when cruzing it would idle at like 2000-2500. When I would get on it kinda hard then push in the clutch it would die. Well I checked the TPS, Bad New one came today I put it on and reset the ECU Idle is where it should be when I was...

Alright I know its not technically slow buts its just not very fast. I raced a 280sx dont really know the year but hes got intake and exhaust and its a 4 cylinder 5 speed. it was about 2 block straight and he was behind me. when I took off I was pulling away and then I see him staying behind me...