Search results

  1. F

    MK3 Drag Racing at TX2K9

    Guys, this is one of the 2 biggest events all year for supras! It actually has the most events(racing that is)!! This is going to be a great year for the MK3 to drag race!! But unless we get more participation it aint going to be pretty! So bring what you have!!! We have a Class for you...
  2. F

    Where to put Vac nipple for boost controller?

    OK, My turbo doesn't have a Nipple on it for the wastegate like the CT does. Should I drill and tap one in the compressor housing or put in the lower IC pipe? My IC pipes are all aluminum so they are thinner than the comp housing. However if I do mess something up on the pipe I can just cut...
  3. F

    Some new parts getting installed!

    Some of you read my thread about my welded clutch and flywheel. While this was being sent out to get fixed, I sold my HKS IC kit and got a bigger setup with the help of a local guy that I have dealt with for a while. The only money out of pocket was for shipping everything off to South Bend to...
  4. F

    IC pipe size 2.5" or 3"

    Hey guys, I've searched and I can't find the thread where you guys were talking about numbers with a SP61 turbo or boss turbo. I'm doing 2.5" lowers, from the turbo to the IC and was thinking about doing the uppers in 3", however it is a pain in the ass trying to route that stuff. I think that...
  5. F

    TX2K9 who's going?

    Who is going to this event?? I'm hoping to have a good turnout for the drag event.
  6. F

    Fidanza or Stock Flywheel??

    Guys currently I have the Fidanza and have welded my clutch twice now. It's mainly because of the Feramic disk that is in there. I am taking it all out today to send to South Bend. Now what I do is daily drive the car for now and drag race when I get the chance. So I was just wanting to know...
  7. F

    Taking tranny out, what gaskets on Motor to replace?

    I'm going to be taking out my tranny on Sunday to send my clutch and flywheel to South Bend Clutch to get fixed, what are some of the gaskets should I replace while I have the chance? I'm ordering ARP flywheel bolts, new intake and exhaust manifold gaskets, new J tube gasket, rear main seal...
  8. F

    Welded Clutch Disc what to do?

    I was driving around and launched hard to get around another car that was about to come in my lane after picking up my son from school and now my clutch disk is welded to the flywheel. I went and drove the car around trying to break it free. Anyone have any suggestions on what to do or a way to...
  9. F

    Odometer Miles with bigger tires

    I have a question for you guys, I have 275/40/17 BFG Gforce Sports, and I went on a trip to a couple of my stores and Mapquest and google maps said it was about 365 miles when I got home from the trip my odometer said that I had only gone 339 miles. Just trying to figure out why my odometer...
  10. F

    Two Problems I hope you guys can Help me with!!

    I have a new job where I have to drive a lot in one day, and right now the Supra is my only car. First, I was driving yesterday and about the 100 mile mark when I got to my first store, I noticed that my over flow tank had spewed out a bunch of brown coolant everywhere like it had over...
  11. F

    DFW Caravan to Austin Hill Cruise meet??

    Anybody want to meet up on Sat morning and Caravan out there? I'm up for is for sure. I know that ToyoRob is going and Datsrboi is going, what about you Poodles? You in? I'd like to leave DFW about 7:30 to give us enough time to get there. We could All meet some where in Ft Worth and head...
  12. F

    Drove my car this morning and my A/C didn't work?

    Guys I have a problem, When I went to take my son to school, I turned the car on and hit my A/C the light would come on and my engine would rev a little higher, but no A/C?? Then I noticed that my stereo presets were gone and my radio was set back to factory. Then I noticed my clock doesn't...
  13. F

    Made a couple of 1/4 mile runs last night.

    Went to the track with my street tires, because I got off too late and had to bleed the clutch before I went. It was finally a little cooler out side about 85. The track wasn't prepped at all. Normally I can get better 60' times on street tires, but all I could muster up were 2.2's. The best...
  14. F

    Tranny grinding only in 1st,2nd 3rd and 5th HELP!

    OK guys, my car is really starting to piss me off. I was on my way to work today and the car is driving fine, I get to a stop light and put in first and it pops out of gear. So I shift to 2nd, and it starts grinding, I swap to third, and it's grinding really bad. So I shift to 4th and it's...
  15. F

    Front runners whatcha guys using?

    Just like the title says!! I'm getting some ET streets for the rear and want to know what you guys are doing for the fronts since it's not a good Idea to mix biasply and radials. I'm open to all suggestions. I see a lot of people also run a wheel like 15x4 with a small radial tire as well...
  16. F

    Oil on 2,3,4,6 plugs??

    Ok guys, I noticed that my car started missing at high rpms, and I was thinking that it was the plugs. So I went and bought new plugs and went to go change them and noticed that I had oil in the galley and my valve covers were leaking everywhere. So tonight I went and installed new valve...
  17. F

    Which piggy back or system to go with?

    I would like to get rid of my LEX AFM and my HKS SAFR and get something that will eliminate the AFM and have more features than my hks safr and keep my AC. I have looked at the Emanage Ultimate and it has a lot of features that I like, anitlag, afm delete, datalogging. The only problem is...
  18. F

    Raced a Lingenfelter Corvette!!

    I was on my way home from training at a new job and there was no one on the highway. I am just cruising in the middle lane, and all I here is a bunch of bikes flying up on my ass, so I just get over to the right lane, and let them pass. Following them was a C4 Corvette, It sounded mean. When...
  19. F

    Looking into new guages, with datalogging?

    OK guys, I need to get some new guages, I have a couple of autometer gauges and would like to replace them with some that data log. My goal would be to get a 60mm gauge and place it where the water temp goes and get 2 52mm gauges where the stock boost and oil pressure goes. My choices are...
  20. F

    Need to quiet exhaust, need suggestions

    OK Guys, I have a 3" Exhaust system from turbo back, no cats, no resonator, just pipe and a Basani muffler. I am driving this car every day now and it's loud inside the cabin. It drones a lot!!! I'm thinking about putting my cat back on and adding a resonator to quiet it down a little and...