Search results

Anyone ever use the driftmotion gasket and seal kit for the 7m. It's says it has all the gaskets and seals you need just not to use the hg and oil pan gasket. It's 100 bucks anyone ever use it. Says it's good quality Gasket

Ok thanks

Ya rods have already been shot peened I was going to just get arp rod bolts. Now when I get those pressed in and get the rods resized I will have to go with a bigger rod bearing correct?

I know head studs are a must but are the rod bolts and mains really needed for 450hp

I'm going arp head studs, arp rod bolts and resizing the rods and should I do main studs also I'm shooting for 450whp Can I just drop in the main studs or do those need to be resized also

Ya my guy charges 50 to mill it to at least 50 ra. So I'm gunna have it milled just enough to clean it and have him hot tank it and put comp springs in

I was thinking to go over with some 1200 wet sand paper and flat plate to clean it up a little more I'm also gunna be using cometic gasket

I don't think the pic loaded

I bought a head off of a member here had a lot of money out into the head 3 angle valve job. Street port and polish,springs tested, new valve stems, all new gaskets, and pressure tested It was decked 10 thousands he ran it for 8,000 miles and blew a bearing so I bought it off him This is how...

How did u grind those down?

Ya probably they were around the same price too 70 bucks for a 4cyl kit so we would need 2 kits

We will find out soon Hastings is good stuff

Ordered a set of probe .20 over for my 7m build about 6 months ago I'm about ready to send all my parts to the machine shot for them to put the long block together and I'm looking for the rings and NPR doesn't make rings anymore Ring Set #14490-STD - SWL02311-0...

I'm getting a hx35 for my build gunna go as far as the 550cc injectors will let me

Pretty straight forward it's been brought up over a million times. Remove all the parts In the way of the head, remove head. If it didn't over heat and ur keeping motor stock. Clean the head and block free of any only hg material. Put a factory hg and arps if u want and torque them down. Put it...

Second pic kind of dark my bad

B&gs

Anyone running the t61 from cx racing the newer ones? It's almost 600 dollars now wondering of they made improvements to it. Thanks guys

Took it for its last drive for the year last night Started the heart transplant