Search results

I decided to check my codes today and I got a code 51 . Now I uses to have serious idle problems but the new iacv and other adjustment has it idling perfect. It idles at around 650 to 700 warm. Sometimes it will idle at 1100 after driving or at a stop light but once I tap the gas it goes back...

I was driving my buddy was behind me riding my ass I reduced to 3rd gunned it and once I hit higher rpms the car felt like it died picked back up died picked back up died. Then I laid off the gas and it was good the cel light went on then when off. It feelt like it was running low on gas. It...

Here is car And I'm getting xxr 527 Now the colors choices are black, silver, chromium black, and bronze

I know I just opened a thread a rims but these are different and I think there are a few running these rims I'm looking at getting these I'm gunna run front 17x8.25 25mm offset Rear 17x9.75 25mm offset I heard some people have to get rid of the lip in the rear fender just...

Fronts are 17x8.25 offset 25mm Rear 17x9.75 offset 25mm In looking at running these I already have tires for them front 245/45/17 Rear 255/40/17

Ok I grounded the white wire with green trace from my dimmer switch because I though that was the culprit. It's not my gauge light go on an off on there own I turn the lights on the will turn on then turn off randomly then turn back on. Turn the headlight on the gauge lights and all tail...

My car whines when I let the clutch out push it in no tranny whine let it out it has a slight whine. Iv read throw out bearing and pilot bearing. Which one is is could it be both

I wanted to make this thread because a lot of people on here are asking me about my b&g springs I have and when I was looking at springs not many people has pics of b&g and there ride hight Mine have been on for about a month now so they have settled a little. There great springs no to stiff...

Before After

I went to the j yard to get a Lexus afm. Bought it came home and it is identical to the one on my car . Adjustment screw and the mounting bracket holes from the Lexus bracket. So my car has had a Lexus afm on it the previous owner didn't even know. He said the guy before him must of put it on...

My car seems to shake/ vibrate a around 2500 rpms only in gear. It won't shake when in neutral. Feels like a very bad unbalanced tire. At 2500 rpm

All my wires and connectors on the turbo side are all brittle and breaking. What the best place to buy new connectors with pigtails . If there is a place to buy them

Passenger side on the the firewall near the abs. Had nothing hooked up to it only the electrical connector. I think it is part of the charcoal can but idk . Do I need this like I said nothing was hooked up to it only the electrical. Will it cause a check engine

Ok so I had a thread up on mhg vs composite and arp head bolts. Bought the car for 1500 with 145,000 mines iv been thinking about doing a engine rebuild because of the unknown engine condition and to be make sure the engine is good before I start modding The engine runs mint no knocks or...

I know most people run mhg and arp studs. I'm gunna be running arp studs and rod bolts with new bearings when I do the engine over. My current mods are Fmic 3 in exhaust Intake Gauges And a downpipe coming in soon Future mods are 550/Lexus Walboro pump Fpr And a 57 trim My question...

Anyone know a good machine shop in nh or mass

I have tt wheels on my supra the back sits flush and I want to get 15 or 20 mm spaces for the front. I was looking at the ichiba spacers and did some research and I have read that the studs that come with the ichiba spaces won't work with the factory thread type lug nuts. I have acorn style lug...

Do any of you remove ur hood liner. My car is getting painted and I don't want to put my crappy hood liner on. So do any of you guys run without a hood liner I'm just worried about engine heat and the paint. I was also looking at aftermarket hood insulation like dynamat hood liner I think...

The PO cut the belt to the ac so I have no ac. I was thinking about deleting it because its a targa top and I'm in nh so summers aren't to hot 70 - 85 usually. What are your thoughts on ac delete.. also my car has no fan shroud are the needed?...I'm gunna get a bigger radiator eventually...

Hey I was wondering how much all of you guys paid for ur 7m rebuild I'm looking at getting the head and block machined. Cylinders honed New rings New bearings MHG Arp studs And all parts hot tanked Also the would be assembling the block I will be taking the head off. Thanks what Im...