Search results

Well got rid of the pos. Pulled all of my electronics out to do my swap into a cressida . Then i found a 88 supra hard top turbo 5 speed that had blown the hg. so the x owner put a so called jdm motor in it and it has set for 5 years cus he did not know what the hell he was doing but was smart...

Ok whats the best way to clean a gas tank that has fuel setting in it for the last 8 years? And yes i goggled it and no i dont have a tractor lol. Tank has been drained and and is siting open to dry it it out. so any ideas to get all the rust out:naughty:

So i have decided to put my 7mgte 5 speed in my 86 mx73 cressida. till i can afford to do the 1uz swap.So what do i need off the supra to make the swap for the 7gte? what we have. The tranny,the motor, ecu, clutch peddle, ignitior , the clips for the ecu that run the dash.the whole wiring...

Ok i was thinking of putting a 1uz-fe in the pos But i have come a cross a 87 cressida i can get for helping out an old lady:icon_bigg. So i havent looked around but does anyone know if the 1uz has been put in a cressida yet cus that just seems like a sick idea to me:evil2:

Ok i have come across a sc300 for really cheap.My idea is that i have everything i need laying around in my garage to convert it to a 7mgte 5spd:evil2:. So what kind of probs am i going to run into? And is this even a good idea?

Ok i just bought a holset hx-35. I have read the post on it And i am lost i know nothing about waste gates and how they work. So my ? is with all my mods i already have what else will i need for this set up? and how does an external waste gate work? i know this is prob a stupid question but i am...

I found a holset hx-27 for 350 brand new. Would this be a good investment? Just reminding every one i have 550 injectors, lexus maf ,neo, block is bored 40 over with forged pistons, clevet bearings,upgraded ic piping with a huge ic, innovated wide band, aem true boost,hks 2mm head gasket, all...

So i went to check on my block Saturday. I found out that they had to shave it 0.020 witch is alot more then i was expecting. So i am planing on boosting around 15lbs so do i need the 2mm hks or the 3mm? I have a 1.2m already im pretty sure after all the research iv done that the 1.2 is no good...

Ok iv been trying to get my buds car ready for the import face off here in okc. whats been done 550 injectors walbro 255 fuel pump (we didn't hollow out the j tube) lex maf greddy turbo that's supposedly is equal to a 60.1 trim 2.5 down piping with stock ic safc will be wired in...

Ok my wife has been bugging me that she wants a supra to. So i found one its a n/a auto, targa with a 100k on it head gasket replaced with stock one at 97k. So here is my problem we had a flood here two years ago the car was drivin into a foot and a half of water and started missing. what has...

Well got my motor off to the machine shop again and i have it all done up right this time(thank you everyone for your help). So today i started on the polishing part of my build. my plans are to paint the block and polish the valve covers, the intake, the coolant intake, the timing cover and my...

OK so i got my block back to put all my stuff back on to get it bored and planned. So question number 1 is i got 12 studs, 12 washers, and 12 nuts, and 2 bolts. Do the two bolts go on the main that has the thrust washers on them? if not where do the two bolts go? Next question is i got my block...

Ok where is jjs post on how to ground the ignitor? iv been looking and cant find it.:: angry ::

Ok i am having my block shaved and board. i understand the timing cover needs to be bolted on but why does the timing idler pulley need to be torqued down? im not arguing i just want to understand what this does.

How is watching the ufc fights tonight in the land down under?

Ok me and my bro went and took a look at a 84 maxima wagon that runs and drives. guy said he would take 400 bucks for it. Sooo the idea is to make a sleeper out of it and put a rb20dte in it with a 5 speed and a 9 inch ford rear:evil2: Any other ideas? i will post pics of it soon.

Ok I should be getting my block back next week I hope. ? Is should I paint it or just leave it alone? If I paint it I'm doing it in neon green or burnt orange. I just think if I'm going to do all this work heck it should have a little o wow when I pop the hood.

Ok my ? Is if I have my engine balanced with the obx dampener will I be ok for 350 to 400 hp or are they junk and should I even waste my money for all 3 pulleys ?

Has anybody ordered parts from cnc motorsports? Was looking they are way cheap but none of there parts match up to specs. Like I was looking at their probe pistions and their bore sizes didn't seam to match up. I know what is posted on thier site is in inches but I did the calculating and it...

Holy crap we had a foot of snow fall here with 40 mile hour winds it so sucks. I know alot of you deal with this every day. But in Oklahoma we just are not use to this hell it was 75 Saturday here lol. :yikes: