Search results

I think it's too wide to fit between the frame rails. Mine is 31"x12"x3" and it just fits between the rails. Matt

Should be running in a few weeks (just in time to put it away for winter). I'm doing great, now the VP of Operations for a surfboard manufacturing company making carbon fiber surfboards (AVISOsurf.com), looking into making a few mkiii parts (nylon bushings, CF stuff, BBK brackets for brembo...

Great job!! Love the new color, now just paint that lip to match! Hey Eric, I remember you from '05, and talked to you about the headlight housings, (I'm the white car parked next to you). Matt

Wrong offset, will stick out like 12" Dayton wires on a lowered metallic green Impala. Matt

A little more progress . . . cut out the bumper: And bolted it back on the bumper cover: I pulled it back off and put a coat of paint on it to keep the rust in check. Pic of the brackets I used to bolt the duct to the bumper skin:

They are from a Suzuki Hayabusa, but I don't think they are hot enough. We'll see once I get the car to the dyno.

Old: New:

No, the center of the actual metal bumper.

Couldn't get the car finished in time for Vegas, bummed I missed it again. The wife is cool with me going to the Supra Nationals in TX this spring though (along with Vegas '08). I've been super busy at work and haven't had anytime to spend on the car . . . until today. I finished the...

Should (knock wood) be done by months end. Couldn't make Vegas (new job, family, etc.). Someone should put a CO meet together this spring, I'd drive out (not that that would make it worthwhile for you guys), but it would be fun to get back to Colorado for a weekend.

They did all the machine work on my block after I melted a piston. The guy/owner has done several 7m's and had a spare/new gte head for sale. He does some excellent quality work and is very well known for it. While I was picking up my block some truck was dropping off some weird looking...

The Engine Shop in Longmont.

Roh Drift-R 17x8 with 235/45 all the way around (for sale). 18x8.5 and 18x9.5 Sterns with 245/40 and 265/35

This is the set up I did last year, it is a completely new full flow oil system. I went with an N/A stud, Canton remote filter adapter, remote filter mount (perma cool:PRM-1791) w/ Canton Mecca 6.25 spin on filter (8 micron filtration), 180deg B&M thermostat (BMM-70259) , earls 13"x7" cooler...

Update: My mom passed away in June (breast cancer). Sad days follow. Started a new job (vp of operations at Avisosurf.com) and have been working insane hours, but one of the coolest surfboards out there, and it's made of carbon fiber. The car is getting sent to the shop tomorrow for...

The pump is made by Walbro for Holley. I don't think it is any different than the $90 Walbros you can find on ebay, just says Holley on the box and "Made by Walbro" on the pump.

Make sure you replace your oil squirters also!

Because their weight bias is towards the rear.

BINGO! Edit: To be more specific, you could do it and keep the balance close to stock by making up for the difference in wheel diameter with tire aspect ratio, meaning you could have a higher profile tire in the front and a lower profile tire in the rear but with equal overall diameters (have...

The mkiii is front heavy to start with, putting a smaller wheel up front vs. a larger one out back will push the balance point even further forward and IMHO it would look like a Mulleted '80s camaro. Since you are considering Teins I would assume you are concerned with handling and moving...