Search results

Recently got a ticket for "Unecessary Noise". I've been running around with no muffler on my car. Was told by officer that it's simply a fix-it ticket. Just put a muffler on, show receipt, and pics to city prosecutor and it will most likely be dismissed. I just wanted a cheap muffler for...

I know there are two ports underneath the intake manifold that it hooks up to. I just need to know exactly which port goes where. For instance, does the port closest to the firewall go to the VSV port closes to the filter? Or vice versa? Anybody have any pics?

A friend of mine lent me his Aeromotive AFPR #13109 cause his car will be down for a while. He had it installed for about two weeks on his car before he decided to pull the engine a do a different swap. My fuel mods: Walbro in tank 255lph pump. Venom 550cc injectors (I bought these in...

Went out the dragstrip tonight. I ran a best of 13.27@101.35mph with a 2.04 sixty. I'll take a pic of the timeslips and post a couple of vids as soon as I can. All runs were made at 10psi of boost. I need MOAR boost. Mod list: Rebuilt stock shortblock. HKS 2.0mm stopper with...

I understand why people slipped the clutch off the line with a turbo car. Keeps wheelspin under control, builds boost at the same time your avoiding bogging out. I've heard of people with 2 steps still slipping the clutch then letting go when they launch. This is odd to me because I...

I got my brand new clutch disc in and have a question. Is this disc supposed to run thin? I measured 0.028" from the top of the ceramic pad to the rivet with my slide caliper. TSRM shows an acceptable minimum rivet depth of 0.012". I know I'm more than double that, but it still seems to be...

Question, is there a full face sprung ceramic disc out there that would hold up mid 400rwtq when used with a stock PP? I want a stock peddle feel without the chatter of a six puck. As some of you know I took the 'ole car out to the dragstrip and the stock clutch didn't hold. I'm now...

Went out to the dragstrip last night. First pass of the night both wheels spun when I did a burnout. Second pass only the right wheel spun. Is it possible that I broke my diff? I don't hear any grinding or crunching noises going. Car doesn't vibrate either. If I change fluid with a...

It was a dissapointing night. I was hoping to at least break into the 13's. The only thing I manage to break was the clutch. I burnt it out. It wasn't holding for shit! It slipped in every gear. I made two passes tonight. Here's the breakdown: Pass 1: Clutch slipped from the get go...

I have a 1991 Supra turbo. I just called my insurance company to see what my monthly premiums would be. They told me it was going to be $149.02 for six month of coverage added to my policy. That's $24.84/month. Does that sound about right to you guys? What are you guys coughing up a month...

I hooked up a voltmeter to Vf1 & E1 pins in the diagnostic block. Once the car warms up the voltmeter reads 3.5v. So that looks normal. While cruising around it reads 5v (4.97) in all gears & all RPM ranges while not in boost. Anytime I touch the throttle it reads 5v wether I'm barely...

We're looking at a 1991 7mgte and has ABS. My brakes went the floor a couple of weeks ago. I finally got around to taking a look at it. I automatically assumed the master cylinder is out, but I wanted to bleed the system first to get that possibility out of the way. I bled them in the proper...

MT ET Streets 26X10.5-16 on factory 1991 5star rims. Any chance/hope of fitting? What's the width on factory rims, 8"?

Had a little fun out back on the farm roads behind my neighborhood. This was just a little run from 1st to 3rd gear. 20-70mph. It wasn't really going all that fast. More noise and wheelspin than anything else. Short shift to second gear, had to throttle 2nd cause the car was going a little...

There was a guy that was on riceboypage.com, a forum I used to belong to, that went by the name Wintermute. I found out that he had a MKIII like myself. I saw his vid and it inspired me to mod mine. Where is this he? Is he still in the MKIII scene? Who was he...

I'm sure it's a repost for some of you guys here, but it's my first time seeing it. http://www.youtube.com/watch?v=BFptzuVgcA8 :3d_frown:

R154 transmission. Resurfaced stock flywheel (FW). Used TRD pressure plate (PP). New Toyota throw out bearing. New Toyota clutch disc. New Toyota pilot bearing. New (not reman) Beck Arnley clutch slave cylinder. Same old 100k mile shift fork. Same old 100k mile clutch master cylinder...

Are all 89+ turbo models ECU pinout diagrams created equal? I have a 1991 Supra turbo. I have this MAP ECU that is not getting an RPM signal. Until it does it will not tell the stock ECU what to do with the injectors. So my car ran as if it didn't have the AFM plugged in. I had to reinstall...

A little background. Shortblock was rebuilt roughly 3 years ago. May 2010 I rechecked the torque specs on the rod and main bolts before I put the oil pump and pan on. It was still lubed up good. I tried starting the car past two weekends and the starter will not turn over the motor...

http://deadspin.com/#!5782089/revenge-of-the-bullied-casey-becomes-an-icon Shut his ass down. I bet that bully will never touch him again. Notice how his taller friend tried to buck up after the little one got the shit slammed out of him. But he still didn't do anything. I bet he was...