Search results

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=250633195374&ssPageName=ADME:B:SS:MOTORS:1123#v4-36

Does anyone know the default dipswitch settings to the F-CON on the mkIII? S1, S2, S3, S4, SW1, SW2, SW3, SW4? Maybe someone could post a high res photo of the internals of their working F-CON?

My friend has a MA70 with 7MGTE and 550 cc injectors. Boss jr 57 trim turbo. JDM A/T ECU on a manual car. We first ran it with a Lexus AFM and it was running extremely rich (AFR 9 or lower) and was cutting out and couldn't boost more than 0.3 bar. It turned out there was a hugh crack in...

What kind of symptoms would you get if the resistance of the pickup coils are too high? I've been tracking a misfire for some time but I never bothered to check the CPS until today. The resistance of the coils are all around 225 ohm. The TSRM says to replace the CPS if the resistance...

Is the 2JZ-GTE TPS compatible with the 7M ECU?

I just need to vent. Before christmas I bought 10 hard drives on ebay. Recieved them shortly after just to find out they were the wrong ones. Seller screwed up. Had to go through dispute and ended up with a refund minus import duty. I then bought an unused ATI harmonic damper for my 7M...

I was wondering if you can use E-type ROMs in the older D-type FCONs? A friend of mine has a D-type FCON but an E-type ROM and it seems to work ok but I don't know if it is correct or there is a potential problem? The D-type FCON has the correct D-type map sensor. I haven't seen any...

Anyone tried putting an automatic transmission from a MK4 into a MK3 with a 7MGTE? Can it be done? How? I'd like to get electronic line pressure control. (I believe that the MK4 has electronic line pressure)

Does anyone know of a company which can produce custom struts with a hydraulic part that can raise and lower the car so it can travel over speed bumps? Like this: http://www.gt40s.com/forum/rcr-forum-rcr40-rcr70-p4-mkiv/26269-s-l-c-lift-kit.html

I'm looking for that small part of the cruise control that is located just above the accelerator and when the cruise actuator pulls it, it depresses the accelerator. I belive it is called the bell crank. Anyone know someone who is breaking a rhd car with cruise?

I'm installing an alarm and it has the feature to cut the power to the ignition. My car is with automatic transmission. I was thinking of wiring it in so that it will cut the power to the ECU. That should stop the car... Can anything bad happen to the engine or transmission if the power...

I'm looking for information on the use of branch resonators in order to reduce drone. Has anyone used branch resonators? Any information? Links? What I'm intersted in is where exactly to put them and how to determine the size (length/diameter).

I have some weird problems starting my car after I swapped out injectors. I wanted to have my injectors cleaned and flow tested so I borrowed a set of injectors from a friend and had them cleaned and flowed. It turned out that four of them were dripping. I put them in and had my own injectors...

Someone told me that the wider the tyres the higher is the recommended tyre pressure. If so how much does the tyre pressure increase with rim/tyre size? On a mkIII running 18 x 8.5 and 18 x 9.5 with 235 front and 275 in rear what would be the recommended tyre pressure? He recommended a...

I've got an ITS GT76 DBB turbo with an A/R 0.84. The turbo is a twin scroll. Which exhaust housing should I choose in order to maximize spool but without choking the engine? If I get 500 hp out of it I'm happy. The engine is a built 7M (no head work except BC 264 cams) with a divided...

I was told by someone that ultrasound cleaning RC injectors could destroy them if not done in some special way. This guy once sent out a set for cleaning and they were destroyed by the process. Is this true? Are there different ways of cleaning injectors? If so does anyone know what not...

I was wondering about one thing. My car is a 7mGTE automatic and when in neutral or park the engine doesn't build turbo pressure at all when I press the accelerator. My friend's Supra which is a manual builds pressure in neutral and vents it through the BOV when you let go of the accelerator...

I have a set of very nice Advan Racing 18 inch rims which I bought used. I only have two center caps/screws so I would like to know where I can get two more. I also need the wrench for the lock nuts. Who sells spare parts for Advan rims? I haver tried emailing a few companies who advertise...

I think my check valve for the ISC valve is broken. I can both blow and suck air through the valve. On my buddies Supra it is only possible to blow air through the valve (from the outside to the inside of the plenum). What would be the symptoms of a broken check valve? When does the idle...

I just come from a friend were we put a set of 550 cc RC injectors on his 7M engine. After mounting them and putting the fuel rail in place it was impossible to plug in the injector plugs as they would hit the fuel rail. Is this normal? We had to cut six notches in the fuel rail in...