Search results

Okay. Here's the story. I was driving down the highway and a truck was slowing down in front of me to make a turn, so I pushed in the clutch to grab 4th gear. The pedal fell to the floor, so I pulled over. I pulled the clutch pedal back up, and then tried to push it back down. Now it wont go...

If it's black its not oil. Sent from my terrible HTC Rezound using Tapatalk. Don't buy HTC...

B&G is fairly comfortable. I can't drive on some gravel roads because the mud flaps scrape, and some speed bumps.. but I think it's the perfect drop. Never once have I hit the liners, and if im careful, I never hit anything else on the car. The downside for auto-x is they are progressive. It...

My first thought was H&Rs aswell..

The only thing that I find them useless for are large drinks.. which I rarely get..

If your car has ABS- RL RR FL FR If your car doesn't have ABS - RR RL FR FL

Probably toyota pistons .5mm over, which is 2 thousanths over.

They may be numbered wrong, but I can tell you "2" on the coil pack (actually 5 I believe) is not going to cylinder 2.

I think the first plug goes to the body harness connector on the engine harness.. Don't quote me though. The second plug i'm pretty sure is the cold start injector temp switch (on the water neck) No idea on the third.

I got a steal on my machine work.. I think it was 250 bucks to machine head and block, clean everything, measure all the journals, bore and hone the cylinders and size them to the pistons. Along with new pistons, rings, and pins. Thing is.. it was 250 bucks for the cleaning, decking, and...

I could make the best out of the both of the harnesses, but it's still gonna be a used harness. PM me if you want more details..

My head was pretty shiny, almost reflective. But you could still see the machining marks. The block was no where near reflective, and you could see the machining marks, but my MHG still sealed perfectly fine (Cometic/titan here) You're never going to get a mirror like surface from machining. To...

I usually listen to music on a USB flash drive anyhow. Sent from my HTC Rezound using Tapatalk

I have a feeling I'm using the window antenna for some reason. I recall having to put a different plug on the end of the cable to get it to plug into the head unit. The one that was there was too small.. Sent from my HTC Rezound using Tapatalk

So do you wire them both to the antenna plug at the HU or what? Sent from my HTC Rezound using Tapatalk

I'll need to check my radio wiring. My reception is not the greatest, and I already found one fault with the aftermarket head unit... The rear speaker leads are going to the front, and the fronts to the rear. How does the rear window antenna connect to the factory radio? Does Toyota run a...

Mine does the same thing, so I'm not really sure if it's broken or not.

Your car probably had a JDM engine put in at some point, as they did not have 7M-GEs in Supras in Japan, only in the Cressida.

Buy a civic. Sent from my HTC Rezound using Tapatalk

The difference in crank pulleys is with Cressida VS. Supra. Cressida pulley has a flat face, whereas the Supra pulley has the indent in it. Supra Cressida