Search results

Who has the size of the banjo bolt fitting of the water return line on the bottom of the water jacket to the turbo. thanks

Thats right Boyz and gurlz I dyno'd today, and with a malfunctioning Emanage, and Vpc, timing at 12 degrees running 17lbs of boost I made 438.17rwhp, and 422ftlbs of torque. At 22 lbs of boost I made 469.55rwhp, and the torque curve wasnt reading properly to find out exactly how much torque was...

Thats right boyz and gurls its time to hit the dyno. I see all these new toys, and before going to Etown who wants to make sure they are tuned right with their new set up. We meet at OBI's then we do like we always do. Shooting for 10/28 when ever Ray can take us! It's 10/28 for sure...

Thats right boyz and gurl last year we had a great turn out at the end of the year Englishtown meet. This year we can do it NOV 4, to join our friends of the Corvette meet yet once again. THE NEW ENLISHTOWN RULES ARE YOU NEEDTO BUY A FIRE JACKET 85.00 AND FULL FACE HELMET 100.00 TO ALL...

I have on order the Haltech E11v2 and will be using Ls-2 coils to fire the engine;) I have a tuner minutes away that has one installed on the 7m. Who has wired one and how long did it take. Thanks

I happen to do a unintentional test of how hot your oil temps get while driving. My oil cooler got a hole and I needed to odred a replacement.So I drove around for a while without a cooler.This got me to thinking that maybe I need a temp switch just to see how things are without a cooler.:nono...

Well I just got banned from Supra Forums because the Moderator didnt like me telling him he was wrong in open forums. So as so may of you have said Fuck supra forums.:aigo: :evil2: Themoderator is sponsored by Dusty and after talking to dusty he said that he shouldnt be talking to people like he...

I am going to get 18x10s in the rear and 18x9 up front.:evil2: They come standard silver or black. Other colorsare extra! The rear has a 3" lip

Well guys I decided to get a better oil filter mount yesterday. While I was redesigning my relocated filter set up, and oil cooler I cracked my oil thermostat and dual mount oil filter mount. These items are made of cast aluminum standardly and IMHO are inferior, albeit they do work. I am...

Well for those of you that don't know me I have been here forever, but since the original forum went down I haven't had much time to post here. I mostly post on supraforums. I started my project in 2004 with a rebuild, and slowly wentfrom a gt4082 to a FFI, and GT4088 turbo from Garrett with a...

-------------------------------------------------------------------------------- Man I remember when I wanted to go FFI and it was a distant dream to do it, but I had no funds available. In the last few years I have come a long ways due to people on this site like DRjonze, Bishop...

I am having a dyno meet next saturday the 1st of October at Pampena Motor Sports in Bohemia LI off of Vets Memorial Highway. We will be meeting at the oakbeach in turn off via Ocean Parkway right off the Sagtikos parkway. We will then line up and do our run to Pampena's. No you don't have to...

I have the emanage and need to tune it;However my tps is zero'd and set to specs, but when I start the car the emanage shows the signal fluxuating 0-100%. Anyone have this problem, and what did ya do!

I took the plunge to home depot to make an upper radiator hard pipe out of the chromed brass J tube used in sinks.lol It looks just like the ones everyone is selling for 80.00. It cost $7.00. I just cut off the threaded end, and cut it to the correct size and used the stock rubber hose to attach...

I finally got my rebuild up and running with all the minor issues adderssed! I can write a book on what f ups and headaches too look out for so yyou can build in confidence and have no rod knock like i have done 4 times successfully. JE pistons .040 over stock rods all resized which is...

This is my new FFI and IC setup with pipes. The FFI has a Q45TB mounted with the 7m TPS attached. The IC was ran in front of the radiator with alternator and AC in place. The IC is 12x24x4 with 3" intake on the driver saide and 2.5" off of the turbo side...

This is a pic of my new ffi and rrelocated alternatorwith ac in place as well. Yes that is a q45 throttle body. http://www.cardomain.com/memberpage/571789/12

How to Minimize or Eliminate the chance of Rod Knock -------------------------------------------------------------------------------- Well I hear many people talk of Getting rod knock after doing a engine rebuild. After doing a successfull rebuild, and then gettting knock I was a little...

http://www.cardomain.com/memberpage/571789/11. I hope to have install pics ready once new block is installed. Those old IC pipes, and things are changeing once again to a new setup. I have been a tad busy this winter.;)