Search results

This is the 4th year for the end of the year Englishtown meet, and all are welcome. The meets have grown each year because of your attendance. thanks for making it a great event.

Does catco or anyone make a 3.5 Cat?

http://www.supraforums.com/forum/showthread.php?t=450043 you dont want to miss this peeps!

-------------------------------------------------------------------------------- I installed 272 8.68mm of lift cams in today, and the car purrs like a kitten. I got about 10-12inches of vaccum and no lope with the cams dialed in to 0 on the cam gears. The cams are quality cams, and the lobes...

Anyone wanting to use a external Idle Speed Control vallve will probably need an external Check valve to keep boost from leaking out when boosting. I bought and tested an Anver 1/2" vacuum check valve to do the job, and it so far lets the car idle up to 2k rpms when fully open.

Anyone wanting to use a external Idle Speed Control vallve will probably need an external Chaeck valve to keep boost from leaking out when boosting. I bought and tested an Anver 1/2" vacuum check valve to do the job, and it so far lets the car idle up to 2k rpms when fully open...

As some of you know the 975-12 competition cam springs are a drop in repalcement for our old worn 100k plus valve train. What most people don't know is that they have a seated 55lbs at 1.5" installed height. Our seated pressure is 35lbs at 1.378" installed height. So when installed on our cars...

For you guys that don't read the northeast section happenings I am hosting an Englishtown opener to take off from the fall meet that I had in Nov of 2006. The relevance is that we finally get recognized again after 2 past failed mega meets there. Show up to be apart of a QWIK;) new...

Well I got tired of f/n with my cps to make my car start because of old wiring. So I decided to cut the plugs and re wire it with two plug kits from Autozone. The 4 wire inline plug kit 48035, and kit 48115. The kits are 4 wires in a row with a male, and female insulated receptacles. The wires...

We had a great fall event with lots of draggers. I am wondering whats a good date for you guys to drive out to have some fun, and see where your car stands for the spring. The last week of March Corvette challenge, or the 2nd week of April challenge sounds good enough to be frost free. I am...

http://www.supramania.com/forums/forumdisplay.php?f=22 Let's see who needs what, and where they are with the mods, and what you need to get ready for the spring. Anthony

I am always meeting new faces here in NY...I am thinking of getting together in two weeks to discuss preformance upgrade technology and such. Lets pick a place and time. MKIII owners get together then eat and go fro a cruise.:naughty: 1. QWIKSTRIKE 2. Dew511 3. Lagged 4. JDM Cress 5...

Just a little FYI guys....If you have emissions problems related to the egr or similar I have found that the EGR port gets extremely clogged over the years and must be cleaned. Also the port on the intake that runs along the whole intake tract of my car was so clogged I needed a little bottle...

-------------------------------------------------------------------------------- I just installed Ksport Kontrol coil overs on my car. Let me be the first to tell you they are awesome.They have 36 way dampening, and full height adjustability front and back. I odered the rates15/kg front and...

For those of you running walbro fuel pumps MAKE SURE YOU DO THE 12V MOD, and RUN A 12 VOLT RELAY FOR EACH PUMP USED! I installed my dual fuel pumps and tested both of them in the tank before installing the tank. After making sure they both worked I buttoned everything up, and then I tested the...

That's right Boyz and gurlz I got MY new Wolf V500 shipped from Autralia in 4 days. Now All I must do is get an installation date. I am deciding also if I want to intall the cams that are on order from HPF, and then get the ECU installed, and tuned with the new cams to save on tuning...

When my red car was hit by a wreckless woman driver I bought this car from a friend. I did't think it was beat on but man what issues I have found along the way. I must replace the sub frame, because its cracked bad near the diff. Let this be a lesson always to check the obvious things...

Whos using an FFI with no ISC and running a standalone. How, or shall I say what are you doing for dle control.:naughty: Thanks

I just ordered the new Wolf V500 and dash for my engine management set up! I am real excited and cant wait til the spring.:love: :naughty: :biglaugh: http://wolfems.cart.net.au/details/721258.html

I installed dual walbros, and my custom fuel rail finally. This is the final leg before installing my standalone. Finally my wait for LS-2coil plug ends is over and I am ready to proceed. The only thing holding me back now is the installer...