Search results

Anybody here in Texas know of a shop around houston that has the walbro 255 lph/hp fuel pump in stock . I need it by saturday HELP!!! You can post ill be on or give me a call at 956-432-1827

Hey guys i been looking in the search button for the last 20 minutes and i can t find the answer. Now the problem is that my tail lights wont turn on when i turn my headlights on. I have the taillights light on the dash ON. The signals work, brake light ON the wing work but not the ones on the...

I got a problem with my idling when at a stop or light, it just wont idle right . I have walbro and aeromotive fpr 550s, lex afm and the guage on the fpr is jumping from 30-35 psi back and forth with the vac line off of it. When i hit the throttle from the engine bay with the vac on it ll got to...

Hey guys while i was test driving the car, I hit the red line 3-4 times and it started missing right after it. Now i have done this; 1. changed to new spark plugs and i have brand new ngk wires 2. did compression test and all are at 172 (did a full engine rebuild 2 months ago) 3. set timing...

Guys some fag recently broke into my car, broke my window and stole my HKS evc 4. Im running on stock wastegate and when i hit the gas my guage will read 8psi then in higher rpms it will creep up to 17psi . What can cause this boost creep? Any help would be appreciated...

I have oil inside the cps and its leaking through a small hole on the back of cps is this normal? it seems to be coming through the shaft that goes into the engine is there a seal or oring i need to replace please help . Im about to leave in a 6 hour trip to south texas...

I would like to know some more info on the hoset turbos such as the He351, Hy35, Hx30, Hx35, Hx40? Im gonna be uppgrading from my Ct26/60-1 to a holset set up and would like to know some info for this turbos? My rwhp goal is 450+ rwhp and would like to bolt on a hoset turbo that will hit hard...

Hey guys im about to do bore the block 40 over. Any houstonians know of a good shop to do this kind of work. Is there a place here in houston to do cryotreating? Let me know ill check later on tonight thanks

Guys I was looking at the radiators and found out the the s13 radiator has the same dimensions and it has inlet and outlet as our radiators but hell of alot cheaper for a 52mm thick s13 radiator. Now my question is HAS ANYBODY DONE IT? s13 aluminum radiator = $120 shipped mk3 aluminum...

Does anybody use one of these LC-1 widebands? Im trying to tune my car but i was wondering if you can datalogg into my laptop with this wideband and im tunning with the SAFC 2. I would go with the aem uego but no dattaloggin technology. Any help would be appreciated thanks

I just got my fully rebuilt and flow testes 87 rx7 turbo II injectors back and i want to run 18 psi with the followin mods were should the base fuel pressure in my AFPR be to run 18 psi?? mods: ct26/60-1 k&n fipk bic ddp + 3in exhaust no cats spec stage 3 12 lbs flywheel walbro...

Do any of u guys know were to get a set of fuel injectors rebuilt and flow tested?? Any personal experiences? How much per injectors?? any info will help found a set of rx7 turbo 2 550cc low imp injectors and im gonna rebuilt and flow test them.

Hey guys just wanted to let everybody know about the sale thats goin on righ now through march 3 i believe in autozone. 5- quarts of ANY castro syntec including the all mighty German Castrol O-30 plus a mobile one high performance filter for $26 thats a $16 dlr savings not bad. Thats a...

I want to know if this intercoolers are 450rwhp capable i mean better than stock??Does anybody have the specs on the spearco Intercooler for the mk3 ?? Im trying to upgrade my intercooler an would like to know if this intercoolers will support 450rwhp? is the intercooler on link one the spearco...

I need some advice i see that the last 2 dynos on the DYNO STICKY were done on stock 440's. I just went to the dyno yesterday and couldnt get lower than 13 afr with the followin mods what else do i need to tune the 440s ? Did u guys mess with afm screw?? any advice would be appreciated ...

Well it started by not idling it sounded like it was misfiring and missing when i turned it on. Then i wouldnt stay on on stop lights i would just turn it one and give it gas to keep it on, when i got to walt mart it died and wont turn on now. the pump is working , i got spark , i adjusted...

Guys just wanted to share this video i found in streetfire p second run on a mk3 http://videos.streetfire.net/video/eed367cb-c226-4da1-a65f-9a0c00de9652.htm

Well the day finally came this employee were i work at just bough his trans am and everybodys jaw dropps everytime he passes by. One day we talked and he brough it up he wanted to race my supra and he was supposely gonna give me a head start so i laughed and i told him ill give him a head start...

I have been losing about aquart of oil per week just did a compression test here are the results 1....136 2....146 3....149 4....150 5....150 6....15o here are my mods....k&n intake,bic ddp, 3"exhaust no cats, walbro, aeromotive afpr set at 40psi,440 inj, lex afm, spec 3, 11lb...

Im in the process of ordering a universal 3 wire o2 sensor i have 3 choices there is an NTK, BORG WARNER and a BECK/ANLEY they come out for early VW 1. Has anybody had any problems with any of these? 2. Which one do you guy think i should get , i found them for about the same price 24...