Search results

Great Job!

/\ Will need 1/2" spacers or trim & cut support

These by far are not an improvement over the stock 6054 sealed beams. Both of you (enjoi.this & conner) say its only $100 & it looks better to me so it is an improvement over stock. Well its not for the exact reasons as Poodles pointed out. Your Ebay set ups do not have properly aimed, focused &...

He did the NA-T. He was running that set up when he attended Indy2K10. His plan was to rebuild the 2JZGE due to some loose valves & still run the NA-T set up but he got a killer deal on a 2JZGTE Long block so he is going to clean it up with new seals & gaskets and swap that in with AEM. I may...

/\ No worries. I was just pointing out that no one in this region is going to fork over the effort, time & money that it takes to DRAW a big # of Supras like the old days. A lot of the older members have moved on to newer platforms. MK3's are almost 25yrs old & The MkIV's or nearly 17 yrs old...

Great job! Props for doing a HID set up the right way I ran into the same clearance issue on my setup. I used 1/2" spacers to move the HL assembly forward & that fixed the issue w/o cutting the support. Looking at your pic for reference You can see by using 1/2" spacers at each HL...

Seriously? To many meets. Out of the meets you listed how many have you attended & participated in? Since I have been in the Supra community I have seen the participation gradually fall off each yr. The reasons are debatable but My first meets that I coordinated for the Kyana SOGI I had 35+...

well I think its siezed up from salt water sitting on a dock. Ill spray it down with pb blaster& soak the cyl a few days. LOL knew this was going to be an ordeal soon as I pulled in my driveway after work to see my son & his friend unloading a 2JZGTE longblock out of a Honda hatchback. Good...

Removed the spark plugs & still wont budge. We have it sitting on a tire using a breaker bar on the crank bolt. Id rather not tear this down not secured to a engine stand.

Yea.. wont budge even with a breaker bar on crank bolt.

My son got a JDM 2JZGTE to put in his SC300. It has the Tq Converter & Flywheel attached still & I cant get it off so that I can mount it on a stand. After pulling & tugging no luck LoL :3d_frown: I tried to just remove the Tq conv from the flywheel but I cant get the converter to rotate so I...

There are a few Besides Chris above theirs myself My 89 Dave's 90 @ Chicago meet Gregs 89 My sons SC300 NA-T Josh SC300 GTE swap (Also in E-Town) Pat in Lexington Rob Chris W Fuzz (Brug on left, my 89, Rob) Cool Vid of Gregs A70...

When I did mine I found using Pilots 6054 H4 Conversion housings worked best. They are clear, easy to separate the lens from the housing & reseal which I had to do several times getting the shroud to line up...

Wish I was closer. I would love to do that esp at those prices.

I only know of 1 True turbo A imported in North America & that was Canada. Keep in mind while it was produced in 1988 it will have 89+ body & Interior. Also will be Right Hand drive & have front bumper duct. That ad sounds like a scam

/\ I used clear silicone sealant/adhesive to re-attach the the clear lens to the H4 housing & in the back where I cut out the hole for the TSX Projector as well. I also used Aluminum Foil tape on the back side of the H4 housing & projector. Info on the Alum Tape...

Hey Grim, its well worth the time & effort. I'm real happy with How mine turned out.

Not with AWD, I think Kenny stands a better chance break boosting from a 40mph roll.

/\ agreed. Nice looking rims.

Nice, That was fun to watch. Great looking Supras.