Search results

So yesterday morning at work, I installed my brand new Walbro 255lph fuel pump that I bought from horsepowerfreaks. At that time I hadnt bypassed the Jtube, so after a 30 min drive home, as soon as I slowed down to about 10 mph in first gear, I noticed that the car started to yank back N forth...

Well after seeing how cheap Srt-4's can get the 2 step future for not to much cash. I decided to contact the company N2MB (Never 2 Much Boost) and ask them if they had a device fueaturing 2 step that would work for a Supra 1989 Turbo. So he replied back and appareantly he thinks its possibe...

Ok so im going to be replacing my fuel pump next week. But while the tank is off the car, I also want to fix my gauge problem. When ever I fill my tank with gas the needle on the gauge will go below empty and it never reads accurately its always off by allot, lets say I have half a tank if will...

Ok so I bought a CPS from a member on here that was suppose to be working in great conditions. And when I installed it, it turned out that it was leaking way more oil in the housing thatn my old one I had on. So now my best bet would be to rebuild it, since it dosent cost much to do it. And also...

Well Its time to replace my tired stock fuel pump with an aftermaket one. Where have you guys bought your Walbro fuel pumps from? I really want a genuine Walbro and don't want to risk buying a fake. Also what mods are neccesary for the Walbro intall? I heard something about the J tube mod? is it...

So ever since i got my full 2.5 IC hard piping and my Sparco replica IC, ive noticed different sounds. When ever I boost say round 6 PSI or higher (around that PSI im not sure) I hear a pssshh ch-ch-chh sound when i shift gear. This is compression surge right? And also if i boost I can here a...

So I'm getting a code 25 running lean, I've tested fuel pressures and they all seem to be within spec, even with the FPR hose disconnected. I replaced my O2 sensor like 5 months ago, its a Denso 3 wire universal O2 sensor that I bought at Autozone. And I just measured the resistance like it says...

Ok so i was looking for cheap methods to get a 2 step system, and i came across this Bee R rev limiter. What i dont get is if this is just for show (flames) or if this will actually help when launching? It wont create boost at the launch will it? Thats was i was looking for. But yeah i was just...

Ok so lately when i got WOT in the upper RPM's it feels like the engine is holding up or like Rpm's are going up slower than usual, this is usually in the 4,000-5,600 rpms range ( I shift at 5,500 or so) its like at those RPM's the engine is not making any power. But when i accelerate normally...

Where exactly are the fusible links on the engine bay #2 junction box? Are the fusible links those big looking type fuses? Thanks http://www.cygnusx1.net/supra/Library/TEWD/MK3/manual.aspx?S=Main&P=33

Okay so my friends 1988 Supra shifter is all loose. Its loose in neutral and also when its in gear. Could this be caused by the bushings on his shifter? If so any one have the part numbers and website I can order them from? Thanks:biglaugh:

I head in another forum that some guy poured a bottle of Sea Foam into his tank with about a gallon a gas, and he said it did work cleaning his injectors. I was wondering if there are any Cons to doing this? Because most of the fuel injector cleaner additive recommend that you fill up your gas...

Ok well about 1 week ago i was getting code 25 and 26, now ive fixed my wiring harness wires that were messed up and I have replaced my CPS and set timing. Now im only getting Code 25 which is Air Fuel Ratio Lean Malfunction (not enough gas). What should i check first or what can the cause of...

Well after i got done with fixing some wiring on my car I went out and test drove it and i noticed my A/C wasnt cooling, it only blows hot air and i also noticed the A/C compressor Fans arent working either. I was looking for A/C fuses but i couldnt find any. Anyone know where the fuses or...

Hey guys I just replaced the CPS on my car but i think i installed it incorrect. The timing mark is at nevative 0* degrees and the cps cant be asjusted anymore. What should i do? should take out the cps and move on tooth? And also if i take out the cps to adjusted should i have to have the...

Hey im about to install a Spearco replica intercooler, and i was wondering if anyone on here has pictures of there installed spearco replica intercoolers on their supras? Looks like theres not going to be much space for the piping. Also is there any other way (besides air box hole) to...

I was wondering if the automatic 89+ Engine wiring harness can be used with the 89+ Manual ECU??? I did an auto to manual swap.

Okay so heres my last question, im installing a CPS i bought. And i was wondering if it should look exactly like the one the the link below or if each CPS has its own different alignment marks. Also I really cant find no alignment marks on the CPS. Where are they at on the cPS? confused...

Ok so I did an auto to R154 swap a few months ago on my 89+, but i kept the Auto ECU and harness. Now i want to swap in an 89+ Manual ECU and Harness. So i was wondering if theres anything else i need to do besides changine the ECU and harness? Also is there a difference between the auto ECU and...

I want to purchase an intercooler off of ebay....i was looking at these, need help choosing one. I know their not the best but they'll be better then the stock one wont right??? XSpower intercooler...