Search results

I just purchased some N/A Mk4 wheels, I was looking at the specs on them and found out the Off set is +50mm. The stock sawblades offset is +35mm I believe. I dont know much about this. But I believe that with that kind of offset the Mk4 wheels will look more tucked in? If so, does anyone if...

So I texted this local guy who is selling a Ct-26 turbo. I text him and he tells me its a JDM CT-26 turbo Ball Bearing. I have never really heard of a stock CT-26 with ball bearing. So it this true or not? Im almost sure its BS, but who knows.

http://www.youtube.com/watch?v=cB9_NYQsWzs A little video I made of my MkIII against a Mustang New Edge GT. I know I know, its really dark and the camara man sucked big time (first time). But hey atleast you can see somewhat of who won.

Ok so just yesterday I started to turn on my A/C. Everything was good, untill I drove it to autozone, I left the car on the with the A/C running, then all of a sudden I felt the a/C compressor turn off, and after a minute of so the car completely turned off. I tried to turn it on and it would...

First of I searched, and I cant seem to search the word "HOP" so it was usless. My questions is... What causes wheel hop? I have had wheel hop for some time now. I recently replaced my stock springs with H&R lowering springs, and 4 brand new KYB GR-2 shocks. First impression is that it felt...

Ok soy I recently lowered my 89 supra turbo 2 weeks ago. I used KYB GR2 shocks with H&R lowering springs. The car seems to sit too low in the front and the rear seems fine. I went to go get it aligned. They rear they were able to align it correctly. But the front is were the problem is. The...

As soon as I logged into here, I noticed an add on top on a site selling Body Kits for Toyotas. They seem to have a whale tail which seems pretty cheap and shipping isnt much either. The price is 150 ish plus like 38 dlls for shipping. Has anyone purchased anything from their site...

Ok so im getting a code Running Lean 25, its been on for a long time now. Ive checked many things and fuel pressure is good, no problems with that. Today I checked my O2 sensor Heater resistance. When Cold it read around 6.8 Ohms At normal operating temp it read around 12 ohms. THe...

I bought some RX-7 550cc injectors a while ago. I noticed that during shipping some of the pintle caps broke, and some are cracked. I was wondering if anyone know's of an online site where I can buy them at? I dont think they're expensive, they should cost a few bucks. Thanks

Im about to purchase some H&R springs (black colored). I did a quick search on them usiing the part numbers on the springs, and they seem to lower supras mk3 1.3" and 1.6". But on here everywhere I find that they lower 2". Why is this? Also if it did lower all the way to 2" using these...

I was wondering where everyone gets OEM type upper control arm bushings? I called the dealer and local stores, and they are all over priced. Again im looking for OEM type! not Energy bushings. Thanks

Anyone know where I can buy a throttle cable for a 89 Supra Automatic Turbo? I called my local dealer and they told they cost 185 dlls lol (crazy). So anyone know of a place that I can get them online for cheaper? Also where can I buy OEM type Upper control arm bushings??? Thanks

So today i was working on my car, i unbolted the WG and after unbolting it i noticed that that the WG arm hits the Downpipe Flange. I believe its a Megan downpipe (starts as 2.5" ends 3"). Well the WG arm hits the DP flange causing it to not fully open. Im running a stock turbo elbow BTW. Has...

Well after leaving my friends house i did a little burnout, then i let off. Dumb me didnt remember my throttle linkage will get stuck open sometimes causing me to hit the revlimiter in between gears. So I let off the gas and the likage was stuck open, after puttiing it in neutral from 1st gear i...

Ok so my goal is 450-500 whp. I was wondering if with an Sp61 turbo I would be able to get those numbers? The car will have its supporting mods for it. Also is this turbo a complete bolt on to the stock manifold? Also wound I need anykind of spacer for it? Is it alright to use the stock...

As I was driving my car a new warning dash light came on today(new to me). Its a little car that looks like its flashing the rear lights. Its right on top of where the ABS warning light is. Anyone know what this is? After i turned off the car, it went away. But then after i got home, It turned...

I'am looking into buying a block with the rotating assembly, it was rebuilt 10,000 miles ago, it has the stock bore. I was told by the owner it has 149-150 compression all accross, except number 6, since the valve wasnt sitting corectly (60psi). Does 149-150 seem like a good compression? He was...

I just purchased a use Greddy Type S BOV. The smaller vaccum nipple seems to be missing (the one on the bottom). Does that nipple need to be hooked up? Or can I get away with just using the big vaccum nipple that on the top? Im also going to recirculated it. THanks :biglaugh...

So a little history on my car, for a few months it had been getting code 25 (running Lean). So a 2 months ago I replaced my fuel pump with a Walbro 255lph from horsepowerfreaks.com. The code didnt go away, then i found out it was my fuel pressure regulator that was faulty. So now I had a chance...

Can anyone do me a big favor? Ok well I was wondering how my sup would look with a Black hood and headliights and black front bumper with a lip....I was wondering if anyone can photoshop that for me? The color of the car is, sky blue (gay blue lol). ITs an 1989+ Sort of like Tonys...