Search results

If I remember right it did not do it when I first got the car back so what I think I'm going to do is new pilot and throw out lol that should fix something.

its new ill say about 7k on it or so. Its a 6 puck chuch with a extream pp, and i have a fidanza flywheel, and new throwout. so the throwout is gone allready?

So it dose the noise when the clutch is middle getting disengage and I’m in a low gear such as first, or its worse as I’m pulling off my driveway, witch usually is in reverse and it’s a bit uphill. Also it dose it when I’m driving and I down shift anywhere from 3k and up...

So my car has been making a funny noise for a while now that its coming from the transmission area. it only dose it when in first gear, and downshift. It dose it in first gear when I’m mid way to letting go of the clutch and when I down shift and let go if the clutch. it sounds like a bird or...

yeah the crack looks something like that, im not sure about geting it welded i mean will it crack again? I mean i have a $500ish budget can i get a good used subframe and all new bushings or im i way off? ps. will be doing all the work on my own. thanks guys

hey guys, so i was working on getting my diff in the today when i noticed that the sub frame ha a crack right over the diff. Basically on top of where the diff meets the driveshaft, its not fully cracked through but its some what a bad crack:nono:.:nono: I was thinking has anyone welded there...

welcome lil brother good to see you here

well the front sounds like if something is loss. When i hit a speed bump or pot hole. The back squials, i can hear it comeing from the shock absorber upper screw. I notice it since instaled them

so i got some Tein HR coilovers and ever since they make lots of noise. first the front sounds like something is loss, and the rear squeal's I can hear it coming from the tower. is there anything i can do to make this better tried turning up the music lol:icon_bigg but that only works then. Dose...

ok so today I put 3.2q of redline MT 90, and drove the car around for a bit seam fine, and then it started to slightly grind 2nd again (sometimes). wtf. Now what, I dont know what to do please help, this is the first time i have this tranny i just did the 1j 5speed swap. Could it be my clutch...

new clutch fluid a month ago ---------- Post added at 06:25 PM ---------- Previous post was at 06:21 PM ---------- Im going to try the MT90 see how we do. thanx guys

So i did the oil change on my r154 tranny, and i have a new problem. ever since I change the oil second gear grinds a lot. I don't understand why, it wasn't doing that before I changed it. I used red line 75w 90 synthetic gear oil GL5 with a half bottle of Lucas transmission fix. ( trying to get...

the 1j was 5 speed. iv seen 2 wires on the passenger side of the tranny but they seam to go up into the car im not sure i need to lift it real good, see if then i can find were they go. ill check by the intake manifold. thanx

I dont know I guess we never came to an agreement about that ---------- Post added at 02:24 PM ---------- Previous post was at 02:21 PM ---------- Its an r154, came with the 1j. I do see a wire on the side i just dont know were my harness wire that gose to the back up lights is at.

Ok so im done with my 1jz 5speed swap i just wish i can get my back up lights to work. I dont know what wire to hook up were or what. Sorry i got a shop to do my swap. I would really want to get my reverse lights to work thought. dose anybody know how, originaly i had a 7mgte auto. thanx

well thanx guys i feel much better now, I thought something might be wrong or so. 1 more question, With time dose this kinda go away or im set for good? just asking. its kinda hard to pull the car in my driveway. lol

Ok so my 1jz 5speed swap is finally done:icon_bigg im really happy!!! the one thing i dont like is the car seams to "shake" when i try to get off the clutch. If i get higher rpm it kinda dose it less. it feels like if something is loose or something. I asked the guys who did the swap and they...

does it come with the bolts?

Ok so im doing a 1jz swap on my mk3, I got most of my parts together, im down to the little stuff now. The 1jz i got had a hydro fan sistem, which im not using so i got a new water pump from DM (driftmotion) but no pully. Is there any other pully i can fit on the new water pump? and also i need...