Search results

Any othe ideas?

what would you guys suggest for me to run for a 600hp 1jz on e85? I wanna run a single -8 feed and a -6 return. so should i run dual walbros? walbro with an inline Bosch 044? one Bosch 044? mk4 intank with inline? dual bosch 044 intanks? thanks corey

ok so ive bought a brand new knock sensor and ran a completely new wire to the front sensor, and i still get code 52.. now ive herd code 55 is the back sensor? is this true or does code 52 work for both front and rear sensors? also can the plugs from the front and rear sensor be switched around...

i see your from milwakee, im from oakcreek, you shoudl stop over some time and take a look at my car. and i really wanna see yours!

I'm looking to put down low 600hp, Wich one of these options would be best? The dritfmotion dm67 kit or a precision 6265 both on e85? 1200cc injectors Dual Bosch 044 intake pumps -8 an feed 264 cams 4 inch exhaust and DP Map ecu2 E85 15-30psi of boost I know the 6265 can do what I...

how do i know wich knock sensor is bad?

mine are gapped at .028

first off i have 3.5'' turbo back, 264 cams, on 12lbs (for now), stock injectors. im running on fresh bcpr7es gapped at .028. Right now it idles around 14.8af-16 af on my wide band. At wot in third gear its 11.5af-12.5af up to 4000 rpm then goes pig rich at 4500rpm (10.2af-10.5af) and looses...

my ignitor is not bolted down. cant i just gound it to teh chassis? also how do i test if i have 12v to my ignotor?

i had no power comming out of my starter solenoid wire. so i tapped into it under the dash my the key. it turns over now but i have no spark..

whats the ecu grounded to?

the ones that come out from underneath the fuse box?

i dont know how i asked how to in my first post? any help?

ok well i have the car cranking but i have no spark, Ive checked fuses, grounds, i have fuel, i haven't checked if i have power at the ignitor or ecu. someone show me how? also i have no cel light when the keys in the on position? does that mean bad ecu? (ill have to open it up). also when i...

ttt

i did it like he did it. straight from that to were terminal 50 lead went before. now the old trigger wire is just hanging not connected to anything.

ok well i have the car cranking but i have no spark, Ive checked fuses, grounds, i have fuel, i haven't checked if i have power at the ignitor or ecu. someone show me how? also i have no cel light when the keys in the on position? does that mean bad ecu? (ill have to open it up). also when i...

ok ill try the relay mod tomorrow. wish me luck!!

i checked grounds, battery, starter, fuses.. what else? i get power to the fuel pump, dash, pretty much everything else works, just when i go to start the car i get a click, engine doesnt turn over. i hear all the relays turn on like normal, i just get nothing but a single click from the...

there was only one plug other than the ones that go into the ecu that plugged in to the harness in pic 3. will the car still start with out them others not plugged in?