Search results

I have 640cc injectors and I'm running 40psi of fuel pressure. When I measured the inpendance of the injector I think they were 7 ohms, don't really remember now. The stinger runs the injectors in parallel so you take half the resistance. Better way to do it is to take the plug that goes into...

1jz, 1.5jz, 2jz: 1jz Turbo size: GT4082 Exhaust housing: Neverchecked Dwell mS: 2.125 Injector ohms: 3.5 Sensitivity: Normal Acceleration Enrichment: 6.4 Enrichment Duration: 45 Hard Rev. Limiter: 8000 Boost cut: boost controller Deceleration fuel cut: -11.8 If you are running a...

thanks jay, i'll give it a day and then pm him

car was tuned and running for about 6 months, then just out of no where started fowling plugs. The afr's are in the right range and the plugs are gapped at .030. I checked my cam sensors and they are both at 1114 ohms. The wires on the sensors look pretty bad so I'm going to redo those.

Hey I know this is old, but I'm having the same issue with weak spark. I plugs also look like yours where the wires are just barely holding on. Just wondering if fixing the wires took car of your problem. Thanks

Well I believe that I have a big problem with weak spark. I have a 1jz with brand new coils and stinger ems. I keep foiling plugs out after about 20-30 minutes run time. I have tested the grounds going to the motor with a multimeter and they read normal. I'm not sure how to get a reading from...

very top of NY. http://maps.yahoo.com/;_ylc=X3oDMTExNmIycG51BF9TAzI3MTYxNDkEc2VjA2ZwLWJ1dHRvbgRzbGsDbGluaw--#mvt=m&lat=44.669865&lon=-74.985889&zoom=9&q1=Potsdam%252C%2520NY

Well I guess its back to trying to tune it on the road. This dyno was an hour and a half away and the next one is about 4 and half hours. When I opened the tune there was a lot of big jumps (hills and valleys). Where I know the supra maps are normally very smooth, this had no smooth lines what...

Thats what I thought, I just wanted to get my facts straight before I told the guy what an idiot he was.

Hey guys my car is at the tuners right now and he is telling me that he can't tune the car in boost. I have an atomsphereic dump tube on an external wastegate, which the wideband is a little bit before the catilytic converter. So hes telling me that the dump tube needs to be rerouted into the...

thanks for the help. I got it to work.

Yeah, I've been picking up some of these steps as a go along. I tryed the relay and it didn't work, but I think I may have been missing a step, so I'll try it again. On to a problem that I was having with while trying to figure this out. Not sure if this is what should happen or not, but...

Yeah I was digging around today and found out that the stinger outputs are grounds. I thought that they were powers. So I rewired it and nothing, my output for the idle air control valve works now. All I get with the fans are a buzzing noise. Now this is what really puzzles me. I check it with a...

I'm hoping some one is willing to draw me a diagram or explain to me how to wire up an electric fan to one the aux outputs on the stinger. I thought that I thought I had it right according to the stinger diagram, but I guess not. Thanks

does anybody know that cheapest past to buy coil packs. I thought I saw them at champion for $55, but now I can't find them anymore.

Yeah the one thing that I wish it had. Was some dyno shops that had even heard of it. :3d_frown:

Thats where I was planning on putting mine. Not really too many other options without extending wires. Have you had any problems with water the way you mounted it.

Thats a good reason. With the stinger driftmotion makes a plug and play harness that is about 2'. Thats why I had the extra room to move it.

not sure if the aem is the same size as the stinger, but with an aftermarket radio I cut the pocket out that goes below the radio and put my stinger under the radio. guess i'm just different.

I'm doing a wire tuck on my car and I'm at the point where I only have the fuse block left to do. I'm hoping that someone has some pictures of how they tucked there fuse block:1zhelp:. Or any pics of a this. Thanks guys.