Search results

Im looking for a custom extended harness for my 2jz MK3 swap. How much are they? How easy to install?:1zhelp:

:1zhelp: I have the aristo and the 7mge driveshaft. Im unsure which will fit if any. Do I need to custom one of them or should I just get an aftermarket 7mgte one? :1zhelp:

Im looking to make around 400-500HP. How much trimming?:naughty:

I have an 89' MK3 with a 2JZ and Im wondering what intercooler size would fit and be sufficient to the 2JZ motor. Im looking for exact measurements. :1zhelp: Thanks

I was just wondering if the Greddy single turbo T78 33D along with the Greddy manifold will fit in my 2jz 89' MK3 chassis. I concerned about clearance issues and any fabrication:1zhelp: so anyone who has this please enlighten me....

I have a 2JZ and an 89' MK3, still waiting for some parts to drop it in, such as a rear sump oil pan etc. Anyways, just wondering what single turbo setups people are running out there. I was thinking of going Garrett GT40R but im unsure of what manifold I should run. Im worried about any...

So that means the oil pickup is interchangeable between the two as well, right? :icon_conf

Hey Cassio how did you go about you're Aristo ecu,wiring into a MA70? Do you know if I can use a 1jz rear sump oil pan on my 2j? Thanks for the help....:1zhelp:

Will a 1jz gte upper and lower oil pan fit on a 2jz gte motor?:icon_conf

Im doing a 2jz mk3 swap and need that part numbers for the rear sump 2jz motor asa mine is a front sump.:icon_conf

Is that the rear sump NA oil pan? Can you give me the part number for that rear sump oil pan etc. that I need also? NA or turbo. :icon_conf Thanks

Hey satan how would I go about my wiring. I have the jdm Aristo 2jz-gte with r154 which is going into an 89' Supra MK3. I heard you make custom wiring harnesses. Just inquiring...:1zhelp:

Do you have a picture of where the oil drain plug should be tapped on the N/A oil pan? :icon_conf

Very nice swaps guys. I hope to be there soon. Just waiting for my rear sump oil pan etc. Which oil pan are you guys using? Where from? Also which motor mounts? I already have 1jz engine brackets and 98' fluid filled style motor mounts that should work:icon_razz . Do you have pics of the...

Just want to see some swaps which might help me with mine...:1zhelp: :1zhelp:

:icon_bigg Just want to know how much horsepower the r154 transmission can hold? I heard of up to 500-600 HP but im not sure. How much HP will the clutch take?...

I have an 89' Supra. Just got an Aristo 2jz front clip a couple months ago, pulled it already. I just need a rear sump oil pan and etc. because mine has a front sump which interferes with the crossmember. Can someone experienced in the swap clarify which oil pan I need (jdm/usdm?,1jz/2jz?). Any...

Just making sure. Is that the JDM 2JZ MK4 or the JDM 1JZ JZA70?:icon_conf

For you guys with a 2jzgte in an MK3, what oil pan are you using off what car? This has to be a rear sump oil pan in order for the 2j to fit in the MK3 if im not mistaken. Any part numbers for this oil pan? Is it off the jza70 1jzgte motor? I have an '89 MK3 swapping in a 2jzgte with later...

The gt35r is good for about 400-600 hp on the 2j depending on supporting mods. Do you have the 2jz mounted in the mk3 chassis already? Which engine brackets and motor mounts are you using? Im wondering about the 2jzgte to 7m wiring conversion? Any suggestions?