Search results

  1. Late

    code 21

    with the ignition off i get no power on either one, im assuming thats how it is supposed to be. could the ground have just got pulled out of where it connects to the block (if thats where it does)?
  2. Late

    code 21

    yes i know how to use a test light, i dont know what youre trying to say. im just trying to get help figuring out what is wrong with this because i dont understand why its happening.
  3. Late

    code 21

    i said all while the ignition is on at the end of the post on top
  4. Late

    box under ecu, where does it plug in

    oh it could be that, ill look at see if it hooks up on top somewhere thanks
  5. Late

    box under ecu, where does it plug in

    ok i can see how it clips up now, but does the plug with 2 wires go to anything? i couldnt find anything it plugged into in plain view
  6. Late

    box under ecu, where does it plug in

    its an 89 with auto climate control, i assume its something for that
  7. Late

    code 21

    can i just cut the wire and then ground it elsewhere with more wire? would that fix the issue?
  8. Late

    code 21

    i connect the test light to a hole in the engine bay for ground, while the o2 sensor is plugged in i touch both of the two black wires individually i get power on both, when i unplug the sensor only one of the wires has power, all while the ignition is on.
  9. Late

    code 21

    what would cause them both to have power then? im confused how that would happen, i didnt realize one was supposed to be ground
  10. Late

    code 21

    are you saying the light is on because the plastic connector broke? that just doesnt make sense to me
  11. Late

    code 21

    yes i know how to use a test light lol, i thought you had asked me to test those wires, they are getting power to the pins and the blue wire has my air fuel ratio gauge attached and that works. im unsure why the code doesnt go away if everything appears to be working
  12. Late

    code 21

    i just checked with a test light and both black wires have power, i do not have a volt meter at least i dont think i do
  13. Late

    code 21

    after i put my engine last week i started getting code 21, i looked it up and it says o2 sensor deterioration. so figuring because my o2 sensor was old i bought a new one (denso 234-3051) and it has the correct plug but the code is still there after i tried clearing codes by pulling efi fuse and...
  14. Late

    box under ecu, where does it plug in

    so completely forgot where the other plug for this plugs in and do not see anything in the general area where it can go
  15. Late

    255 walbro installed and check engine came on...

    cyfi6 gave you the link on how to do it
  16. Late

    need help - clutch pedal has no pressure (pics pg 2)

    take off the plate on the transmission and youll be able to see if something isnt right, the slave cylinder should connect to the clutch fork and push it against the clutch. i had the issue where my slave cylinder missed the hole on my clutch fork and my pedal went to the floor with no pressure.
  17. Late

    need help - clutch pedal has no pressure (pics pg 2)

    There should be a little bleeder valve on it (nut with a nipple type thing on it), may or may not have a little piece of rubber over it. Depends if you have a w58 or r154 on what it looks like but both should be similar.
  18. Late

    need help - clutch pedal has no pressure (pics pg 2)

    this just happened when i installed everything in my car, was really confused why. the slave cylinder is on the bottom driver side of the tranny, slide under there you should see it pretty easy it has a line coming from the engine bay.
  19. Late

    WI Supra owners.

    got everything running good, switched the location of the coupler to the ic side and it holds as much as i can throw at it! on another note does anybody know who has a light blue mk3 in appleton area? it drove by my house on holland near little chute and ive never seen it before
  20. Late

    7m-gte misfire

    Have you checked for any codes? Do you have the correct coil order? Is it a fresh build?
Top Bottom