Search results

Wideband is getting installed but actually the thing is running really rich not lean. Pulled the plugs and just stunk like gas so I'm going to get it retuned once I get the new tps plug installed.

Found out its the tps plug I completely lost throttle response last night a few times push the gas down and got nothing then it finally would just go back to normal so I fiddled with the tps plug and actually got it to make a pull in first gear which was exciting cause its been awhile. Then it...

*Also noticed that when I go WOT my safc says it's only 72% throttle when it use to read 100% before this issue started. Cruising on the interstate in 5th gear pushing the gas to the floor only 72% did this countless times and 72% is the highest it would go.

Ok well put some more gas in and didn't change anything pulled codes first time got 41 51. Reset the ecu and 41 went away so just 51. Still cuts out feels like when it comes on to boost it cuts out and 2nd and 3rd. 2nd gear it will cut out at bout 3.5k 4k when I give it full throttle then the...

Yeah I just picked this thing up not so long ago. Saving up for the fuel rail and regulator bigger pump wideband and standalone right now. Standalone is going to get ordered soon enough.

Alright here is a list of things. rebuilt 2jzge 7m electronics 7m ecu 7m cps 7m coilpacks. Precision 6776 880cc injectors 255 pump 2jzge fuel rail and regulator Ffim 3 in exhaust front mount ic 2.5 piping. safc2 hks vpc

Yeah you can hook up a wideband to the back of the exhaust when your on the dyno to get afr. Well I think I might have a idea of what it could be. I read a thread someone had the same issue and turns out his fuel pump wasn't picking up enough gas when he was under load so he had to keep the tank...

He tuned it on a dyno with a wideband on if then. Yeah I need to get a wideband what I am getting at the moment.

Crappy video but you can see what I mean I'm just rolling really slow and push the gas down and it does it. http://youtu.be/M-YVFbMSKbc. I only had the car since the 1st of feb. Only drove it 3 times got on it only one time then parked it then went to drive this time and ran like this...

Yeah the safc is almost max leaned out on some of the setting up top when I looked at the setting it could use a retune. I picked up the car the day after it was tuned on the dyno. Car does not have a wideband on it I'm already sketched out driving it without one on it. That's one of the first...

So the issue I have now is the car is having this cut out issue when you take off from a stop it doesn't even get to 2k rpms and it just cuts out and the engine light flashes. But if I take off really easy it doesn't it do it. Then if I am in 2nd gear and push the gas down it gets to like 3k...

Yeah I will text you when it starts getting nice out have you check her out. I did go out and started her up today and I think I over reacted a bit car definitely needs a better tune going to sell the safc2 and vpc setup and order my ecumaster emu. Runs really rich when idle you can tell just by...

Well I think I might have figured out the problem with the white smoke the car is running a safc2 and the guy said he tuned it but said it runs in the 10s afr. Car doesn't have a wideband. On the list to buy or a aftermarket boost gauge either. Will start a build thread soon on the car once I...

It has the 2jzgte valve cover on it and the 4 holes under the spark plug cover are open so I'm going to buy the 2 hoses off driftmotion for those the other ones I'm going to setup a catch can for those since it runs a FFIM so I can't use stock locations for pcv. The tube comes out with it too!

So I recently sold my supra and went down to Oklahoma and picked up a super clean rust free mk3 with a na-t setup. From a shop in Tulsa called Vangs dyno performance. Guy was really cool showed me all his skylines and what not, but told me he':rebuilt the engine put new bearings rings headgasket...

I have been looking all day and I can't figure out what size of hose is the stock oil cooler hose that goes to the block. Mine is cracked and need to replace but don't want to get a hose to small or big in diameter then not have another car to get the right size if you get my drift. If anyone...

Want to update this figured out the problem did the relay mod for the starter and solved starts every time.

10psi I'm at 306hp. I made 301hp on stock twins 12psi. But I'm starting to lean out since I'm on stock fuel system even pump. But won't be this spring

Thanks! Yeah that must be me lol. I have also raced a few cars when I went downtown a few times on the bridge on 9th. Ran a acura rsx and just destroyed him and raced a sil80 with a rb20 and had him by a 3 - 4 car lengths

Hi i got a update on some kills! I ran a wrx when I first did my single swap on my 1jz was only running wastegate pressure which was only 6-7 psi and he got the hit right off the bat but once I hit my full boost I ran right by him had him by 3 cars by the time I got out of 33rd.also ran a new...