Search results

Nosechunks: damn.. that sucks.. Do you think ATI Checked that clearance? sorry for the misfortune. hope your driving it sooner

do you know anyone local you could borrow a ecu from? dosen't Sound like a bad ground if you Car ran fine before you touched the wiring and you Shorted something out by a powersurge.. verify all your fuse's are good with multimeter. not just visually they can be deceiving... if you have a...

I ran 12v mod on my stock 7m with walbro 255lph for about 12 months.. I built the car now.. and plan on Rewireing the fuel system for safety precautions.. plus Comfort in mind :-) 12v mod on the ops car should be ok.. Unless you start trying to tune for anything higher..

no 1j and 2j intake manifolds have different lower runners and will not bolt directly up to the 7mgte or ge head with custom making a lower runner

yes I had this problem and so has 60% of mk3 owners.. Im not going to type it all soo.... Read this thread. http://www.supramania.com/forums/showthread.php?150215-Car-didn-t-start-right-away-after-I-washed-it...&p=1771578#post1771578

Your intake wont be Pre heated anymore by the exhaust and the short ic piping, increased throttle response and easy access to ignition... most common and my fav Pros.. cons are like you need to relocate the alt and can loose ac if you do a crazy ffim

lol some people get wiring better than other people.. some people look at their wiring and just see spaghetti.. Its really fun once you get the hang of what set of wires go where, what they do and how to read schematics.. :-) I think its a Great idea to reuse stock alarm wiring if its...

http://store.driftmotion.com/static/i-7mexhaustmanifoldgasket.php

Dang.. lol thats huge.. I wanted to run e85.. and hit 650whp.. so I was planning on 1000cc.. lol max. I will be using a map ecu1/rc550's then hopefully upgrade to a proefi/1000ccs lol Spec is the best quality For Price.. :-) Also another theory.. on lower end clutches.. you pay for about what...

Toyotanos.. what size injectors you using? 880cc?1000cc? Great streetability also because their Full face and not pucks... Spec Is know for the Highest tq holding full face clutchs.. Just saying :-) Great street clutch.. If you plan on a more road course drag setup.. then go with a nice puck or...

Spec for sure.. I'm going to use a Spec stage+3 after I Kill this cheapo I got for tuning. http://www.horsepowerfreaks.com/partdetails/SPEC/Clutch/Clutch_Kits/Import_Stage_5/7248 Spec Import Stage 5(86-92) Toyota Supra MK3 3.0L, Turbo, 710 FT LBS $557.10

Even a brand new starter out of the box could have a bad switch?.. I ever see this problem ill test how much power comes from the ign starter wire and how much it takes to kick the magnetic switch, Thanks...

ok fix it.. what do I fix if my car wont Crank, but has power? I had this problem.. I replaced my Key cylinder(old one worn out), Ignition harness, both relays.. new starter, good battery, new engine harness. what else could have been causing my problem other than the old wiring? Or how could I...

Not Exactly... A 20 year old wiring harness over time gets worn out.. unless he wants to completely rebuild the whole Starting ignition system wiring, he would be better off Adding a relay to the system. You connect the starter ign wire to a relay. give the relay 12v Ground it. and send the...

starter relay mod. not enough power going through your relay also like they said your grounds are probably going out and getting bad.. if that happens to you again and it wont even crank.. grab a wire turn the ignition on and touch the wire to the positive battery terminal and to the starter ...

On a Average.. The size of the injector is the Max hp it is capable of, Generally speaking.. so 550cc injectors are Capable of pushing 550hp. but does not mean your car is capable of it.. and when dealing with e85.. 35% of the cycle is loss due to more fuel being needed.. so maybe 375ish.. In...

noone going to confirm just the two wires are used? IDL and E2? anyone have a picture of the Q45 TPS wired up into a 7m harness?

Hell yea! always puts me in the best of moods! I'm in like 15k+car.. lol still can't drive it yet either >.< finishing the build almost their noone should feel bad either... would you rather buy a brand new lets say Acura TL or a Infiniti for anywhere from 20-30k and have a brand new car...

lol unlikely if all the numbers at +\- 2 with the same amount of cranks I would probably rule out the rings.. and Devin had a good idea.. if you took the oil cap off you could possibly rule out valve seals... I vote turbo also.. everytime you rev it your oil pressure increases and It could...

I believe 42.5 psi - I was born/ raised in Tulsa. edmond is way out their :-) glad to see supras in more rural towns in oklahoma Read this thread.http://www.supraforums.com/forum/showthread.php?550517-Ideal-base-fuel-pressure-for-1000cc-injectors&highlight=base%20fuel%20pressure