Search results

Hey guys my car idles at 1000 rpms after it warms up. I think its a leak in the IC system a very small leak. The reason for putting Metal pipes in is because my IC setup is badly routed. For example i tapped a crib when i went to park and broke one of the hard plastic pipes which i melted it...

Hey guys i bought some bends I plan on welding together for an IC setup. Im not gonna boost much just 9psi but I dont like my current setup. Anyway I kno i am going to need couplers my questions is what size I beleive the ct-26 compressor houseing is 2" I plan on useing the stock IC and 3000...

i thought the stock 7M-GTE ran rich from the factory

it has the stock BOV setup it a stock motor just has a Walbro fuel pump my bigger concern is it idleing high when warm.

I hate Supras too. But I gotta have a favorite and it sure anit gonna be a Honda or a Ford!!!!! I aint a fan or four bangers nor am I a fan of B.S. repairs. I'd do the 1jz swap though the 7m has a longer stroke but I just like the way the 1jz looks in a MKIII bay. good points for the 1jz...

ok im thinking its a sensor but im not sure. When I start the car and its cold it idles fine BUT!!! when i drive while its cold it stalls. For example I'm driveing to a stop light. When I put it in neutral and take my foot off the gas pedal to stop at the light. The idle will go down...

well that throttle body come out of a 88 my engine is a 90. Which has no screw. Even so why when i come to a light it idles at 1500 - 2000 I tap the pedl and it drops to 1000. I swapped out the throttle cable the plate goes all the way back???

vaccum is 21 at idle

ok heres an update. I swapped my ISC's I have two. (one is good it seems and the other you have to beat on, the resistance is in spec on both) Well I got my good one to close and i put it in. Then I lefted it unplugged I started the car adjusted the screw and it idled fine(600). After a bit of...

Hey guys My 7M runs pretty good but I believe I have a intake leak somewhere. I I have a stock 7m-gte with 3in exhaust and a open airfilter. I sprayed Brake Clean around the intake and IC setup i got no change in sound ofcourse maybe I should have someone sit inside and watch the RPM's. At idle...