Search results

i run new ngk bcpr7es gapped at 0,7mm live near Rotterdam

no i cut those :icon_razz

this week my new ecu came in so i installed it @idle it runs great but when i hit the throttle the engine is to run on 5 cilinders just for a second and than it is running oke again also when your driving it does the same anyone an answer on that?

here a picture of the ecu

yess you have to

well i just opened my ecu all the caps looks fine but there is 1 resistor fried. and who knows what other componets are dead

i took it out but did not had the time to open it but i will certanly do that thnx

the ecu was already reset i did not check the codes i will do that i don't think it is a wiring problem nothing changed there and all the connectors are stock

the problem indeed came after i installed the afc but at first it was running fine when it starting running weird i de-installed the afc but the problem stays

this problem started with the sard 540cc injectors so i switch them back for the stockers but the problem stays the same

hi guys, i finished my 7m 1jz swap at first the engine was running fine i had installed sard 540cc injectors because i wanted to start with a big single but later decided to stay with the twins for the time beying but these injectors are to big for the stock twins then i installed a...

hi guys, how do you adjust the tps from a 1jz? yes i know loosen the srews and turn, but i mean when is it at the right spot.

i am busy doing it and the ecu is going to be on the stock place no problems only need to extend the dash plugs

hi guys im doing a 7m 1jz swap i have a soarer 1jz with ecu it seems that there is differrence betweem the wiring and plugs i already found lots of info but that is all jza70 info so i`m lookinf for a soarer wiring diagram who can help me out here thanks

can you help me with a set?

thanks guy`s this is what i needed :thumbup:

hello all can anyone give me the pinout of this 1jzgte ecu? http://www.supramania.com/forums/attachment.php?attachmentid=16826&stc=1&d=1185807864 Afbeelding 013.jpg thanks.

is that piece of metal custom made or can you buy it somewhere?

are there any pictures of that block-off plate?

and what do you put in place of the stock bov?