Search results

I have a HKS FCON here that came with a D105 chip and a pressure sensor 949940-0730. It also came with a harness for a 89+ mkIII. The chip looks to be for use with 550 injectors and a VPC. The problem is that the pressure sensor harness has been removed from the plug so I don't know...

I'm adding TEMS to my car and it is already working. I have a few problems though. Before I realized that I can't find the information in the TEWD I took apart the gauge cluster to harvest the TEMS display and took of the plug of the TEMS steering sensor. So I need to know the colors of...

I'm adding TEMS to my car and so I need to exchange the steering column for one with the steering sensor. How do I get it out? I have gotten to the point where I have unbolted the cover plate from the column hole cover and unbolted the intermediate shaft from the main shaft but the...

Some time ago I found some pictures of a very nice white mkIII with full Bomex kit and Advan three spoke wheels. Now I can't find the pictures. Can anyone help? If not then pictures of mkIIIs with Advan three spoke wheels.

I've been looking for a while now to find someone who sells plain polished aluminum AN fittings which are anodized. I don't like the blue/red color scheme and I'm not too fond of the black stuff either. Any links?

I'm looking for an ECU for my mkIII 7MGTE that will allow me to have true traction control and that will allow me to control the automatic transmission. I was thinking of using an AEM but then I'll need separate traction control and a separat automatic transmission controller. All those...

I just got a set of new TEMS struts and I had someone fit them. What I'm worried about is that the motors don't look like they point the same way: I was there when he mounted them and he mounted the struts to the springs in a machine that compressed the spring and then mounted the...

I'm going to twin turbo my 7MGTE. And before you say it's not worth it, I say it is. End of discussion. I've got a HKS twin turbo T25 manifold here. So I'll be looking for a set of T25/T28 turbos. My power goals are somewhat modest. Around 450 rwhp. I'd rather have less lag and...

I'm trying to relocate my throttle linkage. I've got a JDM throttle body and I want to run the throttle cable from underneeth the intake and have it pull down. I also need to attach the kick-down cable. So I was thinking about getting two or three throttle body rotors and bolt them to the...

A danish guy has built this mkII: http://videos.streetfire.net/video/MA61-Road-test_171157.htm http://videos.streetfire.net/video/MA61-Road-Test_171182.htm It's sick. He has built a custom intake with six ITBs.

European Supras didn't come with spoilers with built in brake lights. So I bought one on ebay and had it shipped from Japan. I had to wire it to the rear brake lights since our Supras don't have the plugs for it either. But no problem there. However as you can see a few of the...

My car is a 92 with shadow gray leather interior. The seats are very nice with no cracks or scratches but the drivers seat has a bit of the usual color fading of the left lower back rest. So I have been thinking about recoloring that part of the seat. The problem is of course to find a...

I'm adjusting the fenders on my car and I'd like to know how much gap is supposed to be between the fenders and the hood and between the hood and the nose piece. If you have a supra that has never been taken apart or if it is perfectly aligned I'd appreciate if you could give me those...

I was wondering if there is any room to adjust the front subframe - side to side. The reason I ask is that is seems like my front subframe has been shiftet 1/4 of an inch towards the passenger side. I haven't dropped the subframe before so I don't know how much (if any) room there is for...

It might have been asked before and I have tried searching for the answer but I couldn't any so I'll risk asking it (again). I just replaced my PS pump (what a pain in the ....) Now I need to know where the two vaccum ports go. I have the two vacuum lines but I fail to see which goes...

I've been having some misfire since I had my engine rebuilt. I have the BC 264 stage 2 cams set at 3½ advance on the exhaust and 2 retard on the intake. I have new working plugs and wires. I have tested for leaks in the intake and found non. I have unplugged the injector one by one and...

I'd like to start a thread with possible ways of retaining a/c on a 7MGTE with a short runner FFIM. As far as I can see the problem is that there will not be enough space to drop the alternator low enough when using a short runner. So I was thinking in the lines of an electrical a/c pump...

Does anyone know of a way to hook up a lamp or so to indicate if the traction control is activated (that means currently trying to avoid spinning the wheels) ? The reason I ask is that I recently had a few scares with the back end suddenly breaking loose during acceleration. It would be...

Do forged pistons require different oil? I have read through the different posts here and I must say it's very informative. However I do have a few questions: I have recently had my 7MGTE engine rebuilt with forged JE pistons (and eagle rods). The engine has been built with close to...

As some of you might have seen I have tracked down an old cast iron manifold for the 7MGTE. It's a twin turbo manifold. From looking at pictures I have found here on Supramania it seems that the manifold is a HKS manifold. I write seems since the HKS letters are not present on my...