Search results

DELETE THIS THREAD!!!

Hi, a while a go i noticed something that sounded just like a rod knock... so i took it to a shop and it was the bolt that holds the pulley, it was missing... They put a new one on and the engine ran super smooth with no knock... Until my headgasket went bad then after everything was done and...

ok so i just had a new headgasket installed and put new ARP head bolts and got it all together and it runs ok... like it's starts fine and idles fantastic better than it has ever idled but it seems there's not much power like i can't go up a slight incline at 50 mph in 5th without having to Nail...

We just got the headgasket on the supra and now we can't get it running, It's perfectly intime, we checked for spark and it's getting spark and it's getting fuel since it sprays out like crazy... so it's good on fuel plus it's got a half a tank. Could it relate to the fuel injector? like if...

Ok, so recently i got a blown head gasket and when my mechanic pulled the head and checked the coolant passages, He reported sludge like gew in the passages... How can the block be Cleaned spotless? Is this normal? I'm guessing that's what happens when oil combines with coolant? I just want...

I'm worried that it's gonna be a nightmare installing these and getting them running correctly. I'm going to be putting Brian Crower Stage 2 cams on at the same time and i was hoping That getting the engine in time would be as easy as stock...?

I need to get new head bolts or studs... What's best? what's the difference? Supra's from the factory came with head bolts, Why not just get ARP head bolts?

I'm looking to getting these set of cams, but i was wondering what the rpm operating range is for them? Does anyone know how the car will run after i get the cams on it? I'm looking for added low end torque and added high rpm power, And how much power could be gained...

Ok, so i got my car up and running again, but now it seems to be missing at idle but after u give it some gas it doesn't seem to miss... why would it blow white smoke off a stop light, but when ur driving it doens't smoke and when u start it up, it's doesn't smoke... I'm guess maybe my head...

I have a brand new alternator and a good fully charged battery and when i go to start the click it clicks once and everything turns off, i mean all the lights. Everything seems Dead... if i pull the negative off the battery and put it back on then i have full power again, but again when i try...

ok so i was running the car pretty hard at high rpm and the alternator belt slipped off, So i put it back on and it started squealing really loud and suddenly it just stopped so i got out and checked the belt, it got so hot it, ripped and it pulled the pulley off with it, the pulley bolt came...

I'm looking to getting a set of crower cams but i'de like to know what the stock 7m-ge lift and duration is so i can compare to the crowers stage 2 and stage 3 cams. I plan on getting the stage 2 cams, Has anyone installed these on their 7m-ge? gains? Added torque? high rpm power? How much hp...

I was putting my car back together the other night, reinstalling my transmission and driveshaft. I noticed that it looks like the driveshaft is adjustable where the center bearing bolts up to, I'm guessing it was out of adjustment because it was leaking a little bit at the back of the output...

OK, so 1,500 miles ago i put a brand new SPEC clutch in my car, Now when i start the car up i cannot put it into gear. When i turn the car off and put it into gear (1st) there's noise that comes from the transmission or inside the bell housing, What do u think could be wrong?

hi, i was just wondering how it would be possible to gain some high rpm power? it seems like after 6k it's done. I've a rebuilt engine and head, racing header, stock exhaust system, and a cold air intake, i also removed the egr system when i rebuilt the engine.

I'm about to be putting a Stock exhaust system on my car, but i don't want it to completely kill my power, So would putting a test pipe in cause it to be much louder? Has anyone tried this?

I've got 5 1/4 Alpine Type S speakers in the front in my supra and they don't sound that great, I'm thinking i need to create an enclosure to get the best out of them? I need to get new rears as well, I think they're 3.5" or 4" but the enclosure works VERY well to get the best out of them. I...

ok so i've got this old Pioneer and i had to get a harness for it, and i wired it up, Soldered etc.. And the headunit works fine in the car, Just there's 1 wire that i couldn't wire up since there were 13 wires from the Honda Harness and 12 on the Pioneer headunit side... the free wire is...

Ok, so i replaced my isc because everytime i started up my car cold or hot it went straight to 650rpm or whatever idle is at, It didn't idle up like it's supposed to. So i replaced the isc and the gasket broke, so i slapped it back together but the idles going up and down.... does that mean my...

My A/C has not been up to par over this summer, And i think my A/C is low on r12... I can retrofit to r134a, but i'm worried that it's not going to be as cold as full system charge of r12.... I can get the retrofit kit at O'reilly for $25... I don't have a clue on what to do, Maybe u guy's...