Search results

thanks for the reply I will be checking those as well

shima glad you got your car running by any chance did they tell you what they did to fix it beside vacuum leaks.

thanks shima i will have to change and check all my gasket at least that's pointing me to a direction on looking for the problem

do you guys have any ideas about this problem between me and shima. any help will be appreciated.

hey suprafanatic did your car also sound like its missing? you know what chima described. I will have to check the wiring for the cps and find a afm for this car thanks for the reply

i checked my cps per other post that's how my cps was lined up with the marks the pointer should be pointing at the 1 o clock magnet right? if i'm off one tooth its a big difference. I did check my timing its set to 10 degrees. I am still stumped at this point

I have the same thing as shima indicated the just wont idle and popping sound from the injectors too. I checked the timing when i was able to get the car warmed it has new plugs and injectors. check the cps its within range ohm wise i check the coil same thing within spec and afm. I also just...

I checked my high tension cord aka spark plug wires 2 of them came up with 2.89 k ohms the other four was 0 ohms am I supposed to have ohm readings on these sparkplug I read the tsrm it said never to exit 25 kilo ohms but nothing in regards to it being 0 anyway, i'm replacing the wires its on...

the car is running the white smoke is from the left over water from the bhg anyway my car is throwing a code now of 31 which if air flow meter. Will this be a symptom of my car running idling bad or it throws that code because I have a leak somewhere between the fam and the throttle body? Any...

thanks for all the responses I change the spark plugs and the doesn't pop as much I will have to order the spark plug wire when I got the car with the bhg the spark plug wires are soaked in oil due to valve cover leak I will look in to checking on the fuel injectors to just replace the rubber...

it has a stock head gasket with new head studs torque to 72 lbs.

I just cleaned the block but the head I had it resurfaced.

I did replace the oil twice. The smell of the smoke smells like the car is running rich. When I start the car it post on the 1 piston and smells coming out from the number 1 fuel injector. I am lost with this. The alignment of the cams at top dead center are the lobes point towards each other or...

Anyway, I just did the headgasket job on my car check the cps for proper alignment took the cover for the cams everything aligns. I start the car the engine has this popping noise and the car is running like its missing and when you rev big white smoke coming out of the tail pipe. I check and...